d4ae9d6ea7
* commit '40fac1a66ccf61bdf3afb70c18a5db7791410b22': (220 commits) Revert "tee: optee: interrupt an RPC when supplicant has been killed" Revert "tee: optee: interrupt an RPC depend on shutdown flag" arm64: dts: rockchip: rv1126bp-evb-v14: Adjust the matching voltage media: rockchip: aiisp: delete one temp buffer to reduce memory media: rockchip: isp: mp output buf notice to aiisp media: rockchip: aiisp: modify for aiynr algo rtc: rockchip: add ready flag for rtc setting time soc: rockchip: cpuinfo: export chip unique id to userspace media: rockchip: vpss: offline mode support auto unite output drm/rockchip: vop2: Add "DIMMING_DATA" property for local dimming media: rockchip: isp: aiisp switch for offline mode media: rockchip: isp: aiisp switch for isp35 media: rockchip: isp: support aiisp yuv mode input: touchscreen: gt1x: prefix global variables and functions with "gt1x_" MALI: valhall: add gpu mem sysfs entry drm/rockchip: Make the DRM panel as part of Rockchip DRM sub devices for panel loader protect drm/rockchip: Pass struct rockchip_drm_sub_dev for &rockchip_drm_sub_dev.loader_protect() pwm: rockchip: Add &rockchip_pwm_chip.oneshot_valid to indicate validity of configurations pwm: rockchip: Add comments for why to add delay before disabling the dclk for PWM v4 input: touchscreen: hyn: reduce logs ... Change-Id: I1b562efca0842173010b2506231d7200a5116e5a
615 lines
13 KiB
Plaintext
615 lines
13 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2025 Rockchip Electronics Co., Ltd.
|
|
*/
|
|
|
|
/ {
|
|
rk809_sound: rk809-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,name = "rockchip,rk809-codec";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&sai0>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&rk809_codec>;
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
vcc_mipi: vcc-mipi {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_mipi";
|
|
gpio = <&gpio6 RK_PA3 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc_sys: vcc-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3800000>;
|
|
regulator-max-microvolt = <3800000>;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vdd_log: vdd-log {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_log";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
uart_rts-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart2m0_rtsn_pins>;
|
|
pinctrl-1 = <&uart2_gpios>;
|
|
BT,power-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
wireless-wlan {
|
|
compatible = "wlan-platdata";
|
|
rockchip,grf = <&grf>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_wake_host>;
|
|
wifi_chip_type = "rk96x";
|
|
WIFI,host_wake-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&backlight {
|
|
pwms = <&pwm0_8ch_0 0 25000 0>;
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&display_subsystem {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi_in_vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi_panel {
|
|
power-supply = <&vcc_mipi>;
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
non-removable;
|
|
mmc-hs200-1_8v;
|
|
rockchip,default-sample-phase = <90>;
|
|
no-sdio;
|
|
no-sd;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
phy-mode = "rgmii";
|
|
clock_in_out = "output";
|
|
|
|
snps,reset-gpio = <&gpio5 RK_PD4 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
assigned-clocks = <&cru CLK_MAC_OUT2IO>;
|
|
assigned-clock-rates = <25000000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ðm1_miim_pins
|
|
ðm1_tx_bus2_pins
|
|
ðm1_rx_bus2_pins
|
|
ðm1_rgmii_clk_pins
|
|
ðm1_rgmii_bus_pins
|
|
ð_clk_25mm1_out_pins>;
|
|
|
|
tx_delay = <0x36>;
|
|
rx_delay = <0x2c>;
|
|
|
|
phy-handle = <&rgmii_phy>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
rk809: pmic@20 {
|
|
compatible = "rockchip,rk809";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PC0 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default", "pmic-sleep",
|
|
"pmic-power-off";
|
|
pinctrl-0 = <&pmic_int>;
|
|
pinctrl-1 = <&soc_slppin_gpio>, <&rk817_slppin_slp>;
|
|
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "rk808-clkout2";
|
|
//fb-inner-reg-idxs = <2>;
|
|
/* 1: rst regs (default in codes), 0: rst the pmic */
|
|
pmic-reset-func = <1>;
|
|
|
|
vcc1-supply = <&vcc5v0_sys>;
|
|
vcc2-supply = <&vcc5v0_sys>;
|
|
vcc3-supply = <&vcc5v0_sys>;
|
|
vcc4-supply = <&vcc5v0_sys>;
|
|
vcc5-supply = <&vcc5v0_sys>;
|
|
vcc6-supply = <&vcc5v0_sys>;
|
|
vcc7-supply = <&vcc5v0_sys>;
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
vcc9-supply = <&vcc5v0_sys>;
|
|
|
|
pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
pinctrl_rk8xx: pinctrl_rk8xx {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
rk817_slppin_null: rk817_slppin_null {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk817_slppin_slp: rk817_slppin_slp {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk817_slppin_rst: rk817_slppin_rst {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun3";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
vdd_npu: vdd_epu: DCDC_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vdd_npu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <950000>;
|
|
};
|
|
};
|
|
|
|
vdd_arm: DCDC_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vdd_arm";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vcc_ddr";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_sys: DCDC_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vcc3v3_sys";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
vcc_0v9: LDO_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-name = "vcc_0v9";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vcc1v8_pmu: LDO_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc1v8_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd0v9_pmu: LDO_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-name = "vcc0v9_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: LDO_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc_dovdd: LDO_REG5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_dovdd";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc_dvdd: LDO_REG6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc_dvdd";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <1200000>;
|
|
};
|
|
};
|
|
|
|
vcc_avdd: LDO_REG7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "vcc_avdd";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <2800000>;
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_sd";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc3v3_sd: LDO_REG9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc3v3_sd";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_buck5: DCDC_REG5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
regulator-name = "vcc_buck5";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <2200000>;
|
|
};
|
|
};
|
|
|
|
vcc5v0_host: SWITCH_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc5v0_host";
|
|
};
|
|
|
|
vcc_3v3: SWITCH_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc_3v3";
|
|
};
|
|
};
|
|
|
|
rk809_codec: codec {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
|
|
clocks = <&sai0_mclkout>;
|
|
clock-names = "mclk";
|
|
assigned-clocks = <&sai0_mclkout>;
|
|
assigned-clock-rates = <12288000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sai0m0_mclk_pins>;
|
|
hp-volume = <20>;
|
|
spk-volume = <3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
pinctrl-0 = <&i2c5m2_pins>;
|
|
status = "okay";
|
|
|
|
gt1x: gt1x@14 {
|
|
compatible = "goodix,gt1x";
|
|
reg = <0x14>;
|
|
pinctrl-names = "default";
|
|
gtp_ics_slot_report;
|
|
power-supply = <&vcc_mipi>;
|
|
goodix,rst-gpio = <&gpio5 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
goodix,irq-gpio = <&gpio5 RK_PA6 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
hynitron: hynitron@5a {
|
|
compatible = "hyn,3240";
|
|
reg = <0x5a>;
|
|
power-supply = <&vcc_mipi>;
|
|
|
|
pinctrl-names = "ts_active","ts_suspend";
|
|
pinctrl-0 = <&ts_int_active &ts_reset_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
|
|
reset-gpios = <&gpio5 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
irq-gpios = <&gpio5 RK_PA6 GPIO_ACTIVE_LOW>;
|
|
|
|
max-touch-number = <5>;
|
|
display-coords = <0 0 1080 1920>;
|
|
pos-swap = <0>;
|
|
posx-reverse = <0>;
|
|
posy-reverse = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
rgmii_phy: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
clocks = <&cru CLK_MAC_OUT2IO>;
|
|
};
|
|
};
|
|
|
|
&mipi_dphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
pmic {
|
|
pmic_int: pmic_int {
|
|
rockchip,pins =
|
|
<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
soc_slppin_gpio: soc_slppin_gpio {
|
|
rockchip,pins =
|
|
<0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
touch {
|
|
ts_int_active: ts_int_active {
|
|
rockchip,pins = <5 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
ts_reset_active: ts_reset_active {
|
|
rockchip,pins = <5 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
ts_int_suspend: ts_int_suspend {
|
|
rockchip,pins = <5 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
ts_reset_suspend: ts_reset_suspend {
|
|
rockchip,pins = <5 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart2_gpios: uart2-gpios {
|
|
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_wake_host: wifi-wake-host {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm0_8ch_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkaiisp {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkaiisp_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkaiisp_vir0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkavsp {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkavsp_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkfec {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkfec_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu {
|
|
rknpu-supply = <&vdd_npu>;
|
|
};
|
|
|
|
&route_dsi {
|
|
status = "okay";
|
|
};
|
|
|
|
&sai0 {
|
|
status = "okay";
|
|
rockchip,sai-rx-route = <3 1 2 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sai0m0_lrck_pins
|
|
&sai0m0_sclk_pins
|
|
&sai0m0_sdi3_pins
|
|
&sai0m0_sdo0_pins>;
|
|
};
|
|
|
|
&sai0_mclkout {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc0 {
|
|
vref-supply = <&vcc_1v8>;
|
|
};
|
|
|
|
&sdmmc0 {
|
|
max-frequency = <200000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc3v3_sd>;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc1 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
no-sd;
|
|
no-mmc;
|
|
max-frequency = <200000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc1_clk_pins &sdmmc1_cmd_pins &sdmmc1_bus4_pins>;
|
|
keep-power-in-suspend;
|
|
non-removable;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2m0_xfer_pins &uart2m0_ctsn_pins>;
|
|
};
|
|
|
|
&usb2phy_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
};
|
|
|
|
&usb_drd_dwc3 {
|
|
extcon = <&usb2phy>;
|
|
phys = <&usb2phy_otg>;
|
|
phy-names = "usb2-phy";
|
|
maximum-speed = "high-speed";
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,usb2-lpm-disable;
|
|
snps,usb2-gadget-lpm-disable;
|
|
};
|