This is the 6.6.89 stable release
* tag 'v6.6.89': (12214 commits)
Linux 6.6.89
objtool: Silence more KCOV warnings, part 2
objtool: Ignore end-of-section jumps for KCOV/GCOV
nvme: fixup scan failure for non-ANA multipath controllers
MIPS: cm: Fix warning if MIPS_CM is disabled
net: dsa: mv88e6xxx: enable STU methods for 6320 family
net: dsa: mv88e6xxx: enable .port_set_policy() for 6320 family
net: dsa: mv88e6xxx: enable PVT for 6321 switch
net: dsa: mv88e6xxx: fix atu_move_port_mask for 6341 family
ext4: goto right label 'out_mmap_sem' in ext4_setattr()
comedi: jr3_pci: Fix synchronous deletion of timer
vmxnet3: Fix malformed packet sizing in vmxnet3_process_xdp
driver core: fix potential NULL pointer dereference in dev_uevent()
driver core: introduce device_set_driver() helper
Revert "drivers: core: synchronize really_probe() and dev_uevent()"
x86/pvh: Call C code via the kernel virtual mapping
spi: spi-imx: Add check for spi_imx_setupxfer()
md/raid1: Add check for missing source disk in process_checks()
x86/cpu: Add CPU model number for Bartlett Lake CPUs with Raptor Cove cores
ubsan: Fix panic from test_ubsan_out_of_bounds
...
Change-Id: I31ab72227263d390aed9b4c8c3361d6abd19fa57
* commit '40fac1a66ccf61bdf3afb70c18a5db7791410b22': (220 commits)
Revert "tee: optee: interrupt an RPC when supplicant has been killed"
Revert "tee: optee: interrupt an RPC depend on shutdown flag"
arm64: dts: rockchip: rv1126bp-evb-v14: Adjust the matching voltage
media: rockchip: aiisp: delete one temp buffer to reduce memory
media: rockchip: isp: mp output buf notice to aiisp
media: rockchip: aiisp: modify for aiynr algo
rtc: rockchip: add ready flag for rtc setting time
soc: rockchip: cpuinfo: export chip unique id to userspace
media: rockchip: vpss: offline mode support auto unite output
drm/rockchip: vop2: Add "DIMMING_DATA" property for local dimming
media: rockchip: isp: aiisp switch for offline mode
media: rockchip: isp: aiisp switch for isp35
media: rockchip: isp: support aiisp yuv mode
input: touchscreen: gt1x: prefix global variables and functions with "gt1x_"
MALI: valhall: add gpu mem sysfs entry
drm/rockchip: Make the DRM panel as part of Rockchip DRM sub devices for panel loader protect
drm/rockchip: Pass struct rockchip_drm_sub_dev for &rockchip_drm_sub_dev.loader_protect()
pwm: rockchip: Add &rockchip_pwm_chip.oneshot_valid to indicate validity of configurations
pwm: rockchip: Add comments for why to add delay before disabling the dclk for PWM v4
input: touchscreen: hyn: reduce logs
...
Change-Id: I1b562efca0842173010b2506231d7200a5116e5a
* commit '62646c7ab19511b8fc17078cf4b0603e550e73cd': (119202 commits)
clk: rockchip: Fix missing rkclk_cpuclk_div_setting prototype for rk3128
rtc: rk808: Explicitly include of.h for of_get_child_by_name
ASoC: rk817: Explicitly include gpio/consumer.h for devm_gpiod_get_optional
drm/rockchip: dsi2: add crtc post enable and pre disable callback
drm/rockchip: vop2: set dsc config done in crtc post enable
input: sensors: avoid -Wempty-body warning
input: sensors: accel: dmard10: Make gsensor_reset() static
ASoC: rk312x: Fix missing prototypes
arm64: dts: rockchip: rk3518: Add rockchip,video-1080p-freq for cpu opp table
soc: rockchip: system_monitor: Add support to limit cpu max freq when play 1080p video
net: phy: Convert to use sysfs_emit_at() API
drm/rockchip: dw_hdmi: Explicitly include pinctrl/consumer.h for devm_pinctrl_get
net: rfkill: bt: Explicitly include pinctrl/consumer.h for pinctrl_select_state
ASoC: codecs: rk_dsm: Explicitly include pinctrl/consumer.h for devm_pinctrl_get
spi: rockchip-slave: Explicitly include pinctrl/consumer.h for pinctrl_pm_select_sleep_state
media: rockchip: isp: Explicitly include platform_device.h
regulator: rk801: Explicitly include platform_device.h
soc: rockchip: decompress: Explicitly include of_platform.h for of_platform_device_create
soc: rockchip: thunderboot_mmc: Explicitly include of_platform.h for of_platform_device_create
soc: rockchip: thunderboot_sfc: Explicitly include of_platform.h for of_platform_device_create
...
Change-Id: I88628746fa5e58f85cf991634fe2f6355ac937e8
If supports DMA, make sure clean DMA states for current transfer,
but if not, don't clean it.
Fixes: 37f373979d ("i2c: rk3x: Add dma feature")
Change-Id: Iad8f999c074cb8710f14c7c0ed782b5df690d6ab
Signed-off-by: David Wu <david.wu@rock-chips.com>
Through testing, it is found that it is better to set the
DMA threshold to 64 bytes, and there will be two more interrupts
after 64 bytes without DMA, which will save time by using DMA,
but for TX, the threshold should be one byte less, because there
will be one more byte of device address.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Change-Id: Iebc3cd81f62d7ee8887319e121a13ed0c27984ad
[ Upstream commit 75caec0c2aa3a7ec84348d438c74cb8a2eb4de97 ]
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Fixes: a076a860ac ("media: i2c: add I2C Address Translator (ATR) support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[wsa: reworded subject]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 285df995f90e3d61d97f327d34b9659d92313314 upstream.
On the GTA04A5 writing a reset command to the gyroscope causes IRQ
storms because NACK IRQs are enabled and therefore triggered but not
acked.
Sending a reset command to the gyroscope by
i2cset 1 0x69 0x14 0xb6
with an additional debug print in the ISR (not the thread) itself
causes
[ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00
[ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1
[ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110)
[ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010)
[ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
repeating till infinity
[...]
(0x2 = NACK, 0x100 = Bus free, which is not enabled)
Apparently no other IRQ bit gets set, so this stalls.
Do not ignore enabled interrupts and make sure they are acked.
If the NACK IRQ is not needed, it should simply not enabled, but
according to the above log, caring about it is necessary unless
the Bus free IRQ is enabled and handled. The assumption that is
will always come with a ARDY IRQ, which was the idea behind
ignoring it, proves wrong.
It is true for simple reads from an unused address.
To still avoid the i2cdetect trouble which is the reason for
commit c770657bd2 ("i2c: omap: Fix standard mode false ACK readings"),
avoid doing much about NACK in omap_i2c_xfer_data() which is used
by both IRQ mode and polling mode, so also the false detection fix
is extended to polling usage and IRQ storms are avoided.
By changing this, the hardirq handler is not needed anymore to filter
stuff.
The mentioned gyro reset now just causes a -ETIMEDOUT instead of
hanging the system.
Fixes: c770657bd2 ("i2c: omap: Fix standard mode false ACK readings").
CC: stable@kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250228140420.379498-1-andreas@kemnade.info
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71c49ee9bb41e1709abac7e2eb05f9193222e580 upstream.
According to the chip manual, the I2C register access type of
Loongson-2K2000/LS7A is "B", so we can only access registers in byte
form (readb()/writeb()).
Although Loongson-2K0500/Loongson-2K1000 do not have similar
constraints, register accesses in byte form also behave correctly.
Also, in hardware, the frequency division registers are defined as two
separate registers (high 8-bit and low 8-bit), so we just access them
directly as bytes.
Fixes: 015e61f0bf ("i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller")
Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: stable@vger.kernel.org # v6.3+
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250220125612.1910990-1-zhoubinbin@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bfd74cd1fbc026f04446e67d6915c7e199c2bffd ]
When a 400KHz freq is used on this model of ELAN touchpad in Linux,
excessive smoothing (similar to when the touchpad's firmware detects
a noisy signal) is sometimes applied. As some devices' (e.g, Lenovo
V15 G4) ACPI tables specify a 400KHz frequency for this device and
some I2C busses (e.g, Designware I2C) default to a 400KHz freq,
force the speed to 100KHz as a workaround.
For future investigation: This problem may be related to the default
HCNT/LCNT values given by some busses' drivers, because they are not
specified in the aforementioned devices' ACPI tables, and because
the device works without issues on Windows at what is expected to be
a 400KHz frequency. The root cause of the issue is not known.
Signed-off-by: Randolph Ha <rha051117@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cefc479cbb50399dec0c8e996f3539c48a1ee9dd upstream.
i2c-atr catches the BUS_NOTIFY_DEL_DEVICE event on the bus and removes
the translation by calling i2c_atr_detach_client().
However, BUS_NOTIFY_DEL_DEVICE happens when the device is about to be
removed from this bus, i.e. before removal, and thus before calling
.remove() on the driver. If the driver happens to do any i2c
transactions in its remove(), they will fail.
Fix this by catching BUS_NOTIFY_REMOVED_DEVICE instead, thus removing
the translation only after the device is actually removed.
Fixes: a076a860ac ("media: i2c: add I2C Address Translator (ATR) support")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Tested-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 093f70c134f70e4632b295240f07d2b50b74e247 ]
When this controller is a target, the NACK handling had two issues.
First, the return value from the backend was not checked on the initial
WRITE_REQUESTED. So, the driver missed to send a NACK in this case.
Also, the NACK always arrives one byte late on the bus, even in the
WRITE_RECEIVED case. This seems to be a HW issue. We should then not
rely on the backend to correctly NACK the superfluous byte as well. Fix
both issues by introducing a flag which gets set whenever the backend
requests a NACK and keep sending it until we get a STOP condition.
Fixes: de20d1857d ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca89f73394daf92779ddaa37b42956f4953f3941 ]
When misconfigured, the initial setup of the current mux channel can
fail, too. It must be checked as well.
Fixes: 50a5ba8769 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This is the 6.1.115 stable release
* tag 'v6.1.115': (2780 commits)
Linux 6.1.115
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
ACPI: PRM: Clean up guid type in struct prm_handler_info
platform/x86: dell-wmi: Ignore suspend notifications
ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()
net: phy: dp83822: Fix reset pin definitions
serial: protect uart_port_dtr_rts() in uart_shutdown() too
selinux: improve error checking in sel_write_load()
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
xfrm: fix one more kernel-infoleak in algo dumping
LoongArch: Get correct cores_per_package for SMT systems
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
openat2: explicitly return -E2BIG for (usize > PAGE_SIZE)
nilfs2: fix kernel bug due to missing clearing of buffer delay flag
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
...
Change-Id: Iee600c49a5c914b79141c62cda38e787e429a167
Conflicts:
arch/arm64/boot/dts/rockchip/rk356x.dtsi
drivers/gpio/gpio-rockchip.c
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.h
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
drivers/gpu/drm/rockchip/rockchip_vop_reg.c
drivers/media/i2c/imx335.c
drivers/pci/controller/dwc/pcie-dw-rockchip.c
drivers/spi/spi-rockchip.c
drivers/spi/spidev.c
drivers/usb/dwc3/gadget.c
drivers/usb/host/xhci.h
commit 49e1f0fd0d4cb03a16b8526c4e683e1958f71490 upstream.
Running i2c-detect currently produces an output akin to:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- 0a -- 0c -- 0e --
10: 10 -- 12 -- 14 -- 16 -- UU 19 -- 1b -- 1d -- 1f
20: -- 21 -- 23 -- 25 -- 27 -- 29 -- 2b -- 2d -- 2f
30: -- -- -- -- -- -- -- -- 38 -- 3a -- 3c -- 3e --
40: 40 -- 42 -- 44 -- 46 -- 48 -- 4a -- 4c -- 4e --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: 60 -- 62 -- 64 -- 66 -- 68 -- 6a -- 6c -- 6e --
70: 70 -- 72 -- 74 -- 76 --
This happens because for an i2c_msg with a len of 0 the driver will
mark the transmission of the message as a success once the START has
been sent, without waiting for the devices on the bus to respond with an
ACK/NAK. Since i2cdetect seems to run in a tight loop over all addresses
the NAK is treated as part of the next test for the next address.
Delete the fast path that marks a message as complete when idev->msg_len
is zero after sending a START/RESTART since this isn't a valid scenario.
CC: stable@vger.kernel.org
Fixes: 64a6f1c498 ("i2c: add support for microchip fpga i2c controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241218-outbid-encounter-b2e78b1cc707@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0cec363197e41af870613e8e17b30bf0e3d41b5 upstream.
Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
compatible string table, at the result, "fsl,imx21-i2c" will be
matched, but it will cause erratum ERR007805 not be applied in fact.
So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
the erratum ERR007805(https://www.nxp.com/docs/en/errata/IMX7DS_3N09P.pdf).
"
ERR007805 I2C: When the I2C clock speed is configured for 400 kHz,
the SCL low period violates the I2C spec of 1.3 uS min
Description: When the I2C module is programmed to operate at the
maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL
clock low period violates the I2C spec of 1.3 uS min. The user must
reduce the clock speed to obtain the SCL low time to meet the 1.3us
I2C minimum required. This behavior means the SoC is not compliant
to the I2C spec at 400kHz.
Workaround: To meet the clock low period requirement in fast speed
mode, SCL must be configured to 384KHz or less.
"
"fsl,imx7d-i2c" already is documented in binding doc. This erratum
fix has been included in imx6_i2c_hwdata and it is the same in all
I.MX6/7/8, so just reuse it.
Fixes: 39c025721d ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Fixes: 39c025721d ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20241218044238.143414-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a8f9320d67b27ddd7f1ee88d91820197a0e908f upstream.
At present, where repeated sends are intended to be used, the
i2c-microchip-core driver sends a stop followed by a start. Lots of i2c
devices must not malfunction in the face of this behaviour, because the
driver has operated like this for years! Try to keep track of whether or
not a repeated send is required, and suppress sending a stop in these
cases.
CC: stable@vger.kernel.org
Fixes: 64a6f1c498 ("i2c: add support for microchip fpga i2c controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241218-football-composure-e56df2461461@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de6b43798d9043a7c749a0428dbb02d5fff156e5 upstream.
Currently, the RIIC driver may run the I2C bus faster than requested,
which may cause subtle failures. E.g. Biju reported a measured bus
speed of 450 kHz instead of the expected maximum of 400 kHz on RZ/G2L.
The initial calculation of the bus period uses DIV_ROUND_UP(), to make
sure the actual bus speed never becomes faster than the requested bus
speed. However, the subsequent division-by-two steps do not use
round-up, which may lead to a too-small period, hence a too-fast and
possible out-of-spec bus speed. E.g. on RZ/Five, requesting a bus speed
of 100 resp. 400 kHz will yield too-fast target bus speeds of 100806
resp. 403226 Hz instead of 97656 resp. 390625 Hz.
Fix this by using DIV_ROUND_UP() in the subsequent divisions, too.
Tested on RZ/A1H, RZ/A2M, and RZ/Five.
Fixes: d982d66514 ("i2c: riic: remove clock and frequency restrictions")
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://lore.kernel.org/r/c59aea77998dfea1b4456c4b33b55ab216fcbf5e.1732284746.git.geert+renesas@glider.be
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7363f2d4c18557c99c536b70489187bb4e05c412 ]
Since commit f63b94be6942 ("i2c: pnx: Fix potential deadlock warning
from del_timer_sync() call in isr") jiffies are stored in
i2c_pnx_algo_data.timeout, but wait_timeout and wait_reset are still
using it as milliseconds. Convert jiffies back to milliseconds to wait
for the expected amount of time.
Fixes: f63b94be6942 ("i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr")
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4268254a39484fc11ba991ae148bacbe75d9cc0a ]
Instead of repeatedly calling clk_get_rate for each transfer, lock
the clock rate and cache the value.
A deadlock has been observed while adding tlv320aic32x4 audio codec to
the system. When this clock provider adds its clock, the clk mutex is
locked already, it needs to access i2c, which in return needs the mutex
for clk_get_rate as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
[ Resolve minor conflicts to fix CVE-2024-40965 ]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8de3e97f3d3d62cd9f3067f073e8ac93261597db upstream.
When the Tx FIFO is empty and the last command has no STOP bit
set, the master holds SCL low. If I2C_DYNAMIC_TAR_UPDATE is not
set, BIT(13) MST_ON_HOLD of IC_RAW_INTR_STAT is not enabled,
causing the __i2c_dw_disable() timeout. This is quite similar to
commit 2409205acd ("i2c: designware: fix __i2c_dw_disable() in
case master is holding SCL low"). Also check BIT(7)
MST_HOLD_TX_FIFO_EMPTY in IC_STATUS, which is available when
IC_STAT_FOR_CLK_STRETCH is set.
Fixes: 2409205acd ("i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low")
Co-developed-by: Xiaowu Ding <xiaowu.ding@jaguarmicro.com>
Signed-off-by: Xiaowu Ding <xiaowu.ding@jaguarmicro.com>
Co-developed-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Liu Peibao <loven.liu@jaguarmicro.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 6.1.99 stable release
* tag 'v6.1.99': (1975 commits)
Linux 6.1.99
Revert "usb: xhci: prevent potential failure in handle_tx_event() for Transfer events without TRB"
Linux 6.1.98
nilfs2: fix incorrect inode allocation from reserved inodes
null_blk: Do not allow runt zone with zone capacity smaller then zone size
spi: cadence: Ensure data lines set to low during dummy-cycle period
nfc/nci: Add the inconsistency check between the input data length and count
kbuild: fix short log for AS in link-vmlinux.sh
nvmet: fix a possible leak when destroy a ctrl during qp establishment
platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
regmap-i2c: Subtract reg size from max_write
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
nvme-multipath: find NUMA path only for online numa-node
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
fs/ntfs3: Mark volume as dirty if xattr is broken
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe()
...
Change-Id: Ibf9c2caa3bbffb7a960e82ec6c2b0b497753778c
Conflicts:
arch/arm64/boot/dts/rockchip/rk3328.dtsi
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
drivers/pinctrl/pinctrl-rockchip.c
drivers/usb/gadget/function/u_audio.c
include/linux/usb/quirks.h
mm/cma.c
sound/soc/rockchip/rockchip_i2s_tdm.c
[ Upstream commit 43457ada98c824f310adb7bd96bd5f2fcd9a3279 ]
On chipsets with a second 'Integrated Device Function' SMBus controller use
a different adapter-name for the second IDF adapter.
This allows platform glue code which is looking for the primary i801
adapter to manually instantiate i2c_clients on to differentiate
between the 2.
This allows such code to find the primary i801 adapter by name, without
needing to duplicate the PCI-ids to feature-flags mapping from i2c-i801.c.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43457ada98c824f310adb7bd96bd5f2fcd9a3279 ]
On chipsets with a second 'Integrated Device Function' SMBus controller use
a different adapter-name for the second IDF adapter.
This allows platform glue code which is looking for the primary i801
adapter to manually instantiate i2c_clients on to differentiate
between the 2.
This allows such code to find the primary i801 adapter by name, without
needing to duplicate the PCI-ids to feature-flags mapping from i2c-i801.c.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c8d604dea437b69a861479b413d629bc9b3da70 ]
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: 36ecbcab84 ("i2c: xiic: Implement power management")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8390dc7477 ]
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(),
with a single function devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 0c8d604dea43 ("i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d3cefaf659265aa82b0373a563fdb9d16a2b947 ]
Krzysztof reported an issue [0] which is caused by parallel attempts to
instantiate the same I2C client device. This can happen if driver
supports auto-detection, but certain devices are also instantiated
explicitly.
The original change isn't actually wrong, it just revealed that I2C core
isn't prepared yet to handle this scenario.
Calls to i2c_new_client_device() can be nested, therefore we can't use a
simple mutex here. Parallel instantiation of devices at different addresses
is ok, so we just have to prevent parallel instantiation at the same address.
We can use a bitmap with one bit per 7-bit I2C client address, and atomic
bit operations to set/check/clear bits.
Now a parallel attempt to instantiate a device at the same address will
result in -EBUSY being returned, avoiding the "sysfs: cannot create duplicate
filename" splash.
Note: This patch version includes small cosmetic changes to the Tested-by
version, only functional change is that address locking is supported
for slave addresses too.
[0] https://lore.kernel.org/linux-i2c/9479fe4e-eb0c-407e-84c0-bd60c15baf74@ans.pl/T/#m12706546e8e2414d8f1a0dc61c53393f731685cc
Fixes: caba40ec3531 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case")
Cc: stable@vger.kernel.org
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73febd775bdbdb98c81255ff85773ac410ded5c4 ]
Two drivers already implement custom debugfs handling for their
i2c_adapter and more will come. So, let the core create a debugfs
directory per adapter and pass that to drivers for their debugfs files.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 8d3cefaf6592 ("i2c: core: Lock address during client device instantiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 521da1e9225450bd323db5fa5bca942b1dc485b7 upstream.
Frequently an I2C write will be followed by a read, such as a register
address write followed by a read of the register value. In this driver,
when the TX FIFO half empty interrupt was raised and it was determined
that there was enough space in the TX FIFO to send the following read
command, it would do so without waiting for the TX FIFO to actually
empty.
Unfortunately it appears that in some cases this can result in a NAK
that was raised by the target device on the write, such as due to an
unsupported register address, being ignored and the subsequent read
being done anyway. This can potentially put the I2C bus into an
invalid state and/or result in invalid read data being processed.
To avoid this, once a message has been fully written to the TX FIFO,
wait for the TX FIFO empty interrupt before moving on to the next
message, to ensure NAKs are handled properly.
Fixes: e1d5b6598c ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Cc: <stable@vger.kernel.org> # v2.6.34+
Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2c85d85a05f16af2223fcc0195ff50a7938b372 upstream.
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 37692de5d5 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Cc: <stable@vger.kernel.org> # v4.19+
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 048bbbdbf85e5e00258dfb12f5e368f908801d7b upstream.
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex.
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: 4e7bca6fc0 ("i2c: i2c-stm32f7: add PM Runtime support")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1d4a1adbed2582444aaf97671858b7d12915bd05 ]
In the event that the I2C bus was powered down when the I2C controller
driver loads, or some spurious pulses occur on the I2C bus, it's
possible that the controller detects a spurious I2C "start" condition.
In this situation it may continue to report the bus is busy indefinitely
and block the controller from working.
The "single-master" DT flag can be specified to disable bus busy checks
entirely, but this may not be safe to use in situations where other I2C
masters may potentially exist.
In the event that the controller reports "bus busy" for too long when
starting a transaction, we can try reinitializing the controller to see
if the busy condition clears. This allows recovering from this scenario.
Fixes: e1d5b6598c ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Cc: <stable@vger.kernel.org> # v2.6.34+
Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee1691d0ae103ba7fd9439800ef454674fadad27 ]
xiic_start_xfer can fail for different reasons:
- EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg
- ETIMEDOUT: timed-out trying to clear the RX fifo
- EINVAL: wrong clock settings
Both EINVAL and ETIMEDOUT will currently print a specific error
message followed by a generic one, for example:
Failed to clear rx fifo
Error xiic_start_xfer
however EBUSY will simply output the generic message:
Error xiic_start_xfer
which is not really helpful.
This commit adds a new error message when a busy condition is detected
and also removes the generic message since it does not provide any
relevant information to the user.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1db4da55070d6a2754efeb3743f5312fc32f5961 upstream.
In accordance with the existing comment and code analysis
it is quite likely that there is a missed 'else' when adapter
times out. Add it.
Fixes: 5bc1200852 ("i2c: Add Intel SCH SMBus support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org> # v2.6.27+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93701d3b84ac5f3ea07259d4ced405c53d757985 upstream.
When the i2c bus recovery occurs, driver will send i2c stop command
in the scl low condition. In this case the sw state will still keep
original situation. Under multi-master usage, i2c bus recovery will
be called when i2c transfer timeout occurs. Update the stop command
calling with aspeed_i2c_do_stop function to update master_state.
Fixes: f327c686d3 ("i2c: aspeed: added driver for Aspeed I2C")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 564d73c4d9 ]
Add i2c_get_match_data() to get match data for I2C, ACPI and
DT-based matching, so that we can optimize the driver code.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
[wsa: simplified var initialization]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 119abf7d1815 ("hwmon: (max16065) Fix alarm attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6722ea6b9ed731f7392277d76ca912dfffca7ee ]
'pclk' is only used locally in the probe. Remove it from the
'synquacer_i2c' structure.
Also remove a useless debug message.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Stable-dep-of: f2990f863053 ("i2c: synquacer: Deal with optional PCLK correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d3cefaf659265aa82b0373a563fdb9d16a2b947 ]
Krzysztof reported an issue [0] which is caused by parallel attempts to
instantiate the same I2C client device. This can happen if driver
supports auto-detection, but certain devices are also instantiated
explicitly.
The original change isn't actually wrong, it just revealed that I2C core
isn't prepared yet to handle this scenario.
Calls to i2c_new_client_device() can be nested, therefore we can't use a
simple mutex here. Parallel instantiation of devices at different addresses
is ok, so we just have to prevent parallel instantiation at the same address.
We can use a bitmap with one bit per 7-bit I2C client address, and atomic
bit operations to set/check/clear bits.
Now a parallel attempt to instantiate a device at the same address will
result in -EBUSY being returned, avoiding the "sysfs: cannot create duplicate
filename" splash.
Note: This patch version includes small cosmetic changes to the Tested-by
version, only functional change is that address locking is supported
for slave addresses too.
[0] https://lore.kernel.org/linux-i2c/9479fe4e-eb0c-407e-84c0-bd60c15baf74@ans.pl/T/#m12706546e8e2414d8f1a0dc61c53393f731685cc
Fixes: caba40ec3531 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case")
Cc: stable@vger.kernel.org
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73febd775bdbdb98c81255ff85773ac410ded5c4 ]
Two drivers already implement custom debugfs handling for their
i2c_adapter and more will come. So, let the core create a debugfs
directory per adapter and pass that to drivers for their debugfs files.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 8d3cefaf6592 ("i2c: core: Lock address during client device instantiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5d69d5a00f80488ddcb4dee7d1374a0709398178 upstream.
It was observed that issuing the ABORT bit (IC_ENABLE[1]) will not
work when IC_ENABLE is already disabled.
Check if the ENABLE bit (IC_ENABLE[0]) is disabled when the controller
is holding SCL low. If the ENABLE bit is disabled, the software needs
to enable it before trying to issue the ABORT bit. otherwise,
the controller ignores any write to ABORT bit.
These kernel logs show up whenever an I2C transaction is
attempted after this failure.
i2c_designware e95e0000.i2c: timeout waiting for bus ready
i2c_designware e95e0000.i2c: timeout in disabling adapter
The patch fixes the issue where the controller cannot be disabled
while SCL is held low if the ENABLE bit is already disabled.
Fixes: 2409205acd ("i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low")
Signed-off-by: Kimriver Liu <kimriver.liu@siengine.com>
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
