arm64: dts: qcom: drop redundant line breaks

Remove trailing, redundant line breaks.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306081430.28491-2-krzysztof.kozlowski@linaro.org
This commit is contained in:
Krzysztof Kozlowski
2023-03-06 09:14:30 +01:00
committed by Bjorn Andersson
parent e225d56042
commit e18b829549
18 changed files with 0 additions and 29 deletions

View File

@@ -1137,7 +1137,6 @@
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&venus {

View File

@@ -2180,7 +2180,6 @@
};
};
};
};
timer {

View File

@@ -1882,7 +1882,6 @@
"cfg",
"bus_master",
"bus_slave";
};
pcie1: pcie@608000 {
@@ -3471,7 +3470,6 @@
};
};
};
};
};

View File

@@ -3027,7 +3027,6 @@
required-opps = <&rpmhpd_opp_nom>;
};
};
};
dsi0: dsi@ae94000 {

View File

@@ -943,7 +943,6 @@
opp-avg-kBps = <390000 0>;
};
};
};
gpi_dma0: dma-controller@900000 {
@@ -3298,7 +3297,6 @@
opp-avg-kBps = <200000 0>;
};
};
};
usb_1_hsphy: phy@88e3000 {
@@ -3767,7 +3765,6 @@
required-opps = <&rpmhpd_opp_turbo>;
};
};
};
videocc: clock-controller@aaf0000 {

View File

@@ -2781,7 +2781,6 @@
drive-strength = <2>;
slew-rate = <1>;
bias-bus-hold;
};
};
@@ -4413,7 +4412,6 @@
required-opps = <&rpmhpd_opp_nom>;
};
};
};
mdss1_dp1: displayport-controller@22098000 {

View File

@@ -395,7 +395,6 @@
regulator-enable-ramp-delay = <500>;
};
};
};
&gcc {

View File

@@ -45,7 +45,6 @@
"AMIC3", "MIC BIAS4",
"AMIC4", "MIC BIAS1",
"AMIC5", "MIC BIAS3";
};
/*

View File

@@ -233,7 +233,6 @@
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
pm6150l_l7: ldo7 {
@@ -255,7 +254,6 @@
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
pm6150l_l10: ldo10 {

View File

@@ -176,7 +176,6 @@
cache-level = <2>;
next-level-cache = <&L3_0>;
};
};
CPU6: cpu@600 {
@@ -888,7 +887,6 @@
interconnect-names = "qup-core", "qup-config", "qup-memory";
status = "disabled";
};
};
config_noc: interconnect@1500000 {

View File

@@ -139,7 +139,6 @@
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU6: cpu@600 {

View File

@@ -92,7 +92,6 @@
cache-level = <2>;
next-level-cache = <&L3_0>;
};
};
CPU2: cpu@200 {

View File

@@ -247,7 +247,6 @@
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU6: cpu@600 {
@@ -2428,7 +2427,6 @@
drive-strength = <2>;
slew-rate = <1>;
bias-bus-hold;
};
};
@@ -2447,7 +2445,6 @@
drive-strength = <2>;
input-enable;
bias-pull-down;
};
};
@@ -3022,7 +3019,6 @@
};
};
};
};
etf@6b05000 {

View File

@@ -678,7 +678,6 @@
bias-pull-up;
};
};
};
&uart2 {

View File

@@ -155,7 +155,6 @@
cache-level = <2>;
next-level-cache = <&L3_0>;
};
};
CPU6: cpu@600 {

View File

@@ -377,7 +377,6 @@
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-3 {

View File

@@ -282,7 +282,6 @@
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-3 {

View File

@@ -154,7 +154,6 @@
cache-level = <2>;
next-level-cache = <&L3_0>;
};
};
CPU6: cpu@600 {
@@ -2762,7 +2761,6 @@
remote-endpoint = <&mdss_dsi1_in>;
};
};
};
mdp_opp_table: opp-table {
@@ -3569,7 +3567,6 @@
pins = "gpio76", "gpio77", "gpio78", "gpio79";
function = "qup20";
};
};
lpass_tlmm: pinctrl@3440000 {