arm64: dts: rockchip: Update WIFi/BT related nodes on rk3308-rock-pi-s

[ Upstream commit 12c3ec878cbe3709782e85b88124abecc3bb8617 ]

Update WiFi SDIO and BT UART related props to better reflect details
about the optional onboard RTL8723DS WiFi/BT module.

Also correct the compatible used for bluetooth to match the WiFi/BT
module used on the board.

Fixes: bc3753aed8 ("arm64: dts: rockchip: rock-pi-s add more peripherals")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-14-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Jonas Karlman
2024-05-21 21:10:16 +00:00
committed by Greg Kroah-Hartman
parent e3d7674575
commit 9e12fffb69

View File

@@ -17,6 +17,7 @@
ethernet0 = &gmac;
mmc0 = &emmc;
mmc1 = &sdmmc;
mmc2 = &sdio;
};
chosen {
@@ -174,6 +175,20 @@
pinctrl-names = "default";
pinctrl-0 = <&rtc_32k>;
bluetooth {
bt_reg_on: bt-reg-on {
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_wake_host: bt-wake-host {
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
host_wake_bt: host-wake-bt {
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gmac {
mac_rst: mac-rst {
rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -223,11 +238,24 @@
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
max-frequency = <1000000>;
max-frequency = <100000000>;
mmc-pwrseq = <&sdio_pwrseq>;
no-mmc;
no-sd;
non-removable;
sd-uhs-sdr104;
sd-uhs-sdr50;
vmmc-supply = <&vcc_io>;
vqmmc-supply = <&vcc_1v8>;
status = "okay";
rtl8723ds: wifi@1 {
reg = <1>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake>;
};
};
&sdmmc {
@@ -259,12 +287,16 @@
};
&uart4 {
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "realtek,rtl8723bs-bt";
device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
compatible = "realtek,rtl8723ds-bt";
device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
};
};