arm64: dts: rockchip: rv1126b-evb2: Add rgb 1024x600p60 panel display board

Change-Id: I9212046ab0d8aab4b80d1b38475781aa2f04cdbc
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
This commit is contained in:
Chaoyi Chen
2025-03-11 02:46:22 +00:00
committed by Tao Huang
parent 3adfbaf012
commit 4a117f10bf
2 changed files with 79 additions and 0 deletions

View File

@@ -365,6 +365,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-tablet-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-tablet-v11.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rv1126b-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rv1126b-evb2-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rv1126b-evb2-v10-rgb-Q7050ITH2641AA1T.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rv1126b-evb3-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rv1126b-evb4-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rv1126b-iotest-v10.dtb

View File

@@ -0,0 +1,78 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2025 Rockchip Electronics Co., Ltd.
*/
/dts-v1/;
#include <dt-bindings/display/media-bus-format.h>
#include "rv1126b-evb2-v10.dts"
/ {
model = "Rockchip RV1126B EVB2 V10 Board + RK EVB VOP3 RGB24BIT DISPLAY Ext Board";
compatible = "rockchip,rv1126b-evb2-v10-rgb-Q7050ITH2641AA1T", "rockchip,rv1126b";
panel: panel {
compatible = "simple-panel";
bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
backlight = <&backlight>;
enable-gpios = <&gpio7 RK_PA7 GPIO_ACTIVE_LOW>;
enable-delay-ms = <20>;
reset-gpios = <&gpio5 RK_PD6 GPIO_ACTIVE_LOW>;
reset-delay-ms = <10>;
status = "okay";
display-timings {
native-mode = <&q7050ith2641aa1t_timing>;
q7050ith2641aa1t_timing: timing0 {
clock-frequency = <51200000>;
hactive = <1024>;
vactive = <600>;
hback-porch = <160>;
hfront-porch = <160>;
vback-porch = <23>;
vfront-porch = <12>;
hsync-len = <24>;
vsync-len = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
};
port {
panel_in_rgb: endpoint {
remote-endpoint = <&rgb_out_panel>;
};
};
};
};
&rgb {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rgb888_pins>;
ports {
rgb_out: port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
rgb_out_panel: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_in_rgb>;
};
};
};
};
&rgb_in_vop {
status = "okay";
};
&route_rgb {
status = "okay";
};