Files
rockchip-kernel/arch/arm64/boot/dts/rockchip/rk3566-evb1-ddr4-v10.dtsi
Wu Liangqing f33ac42bfe arm64: dts: rockchip: enable dsi uboot logo display for rk356x evb
Signed-off-by: Wu Liangqing <wlq@rock-chips.com>
Change-Id: Iac2bc0eef65262798dd3c6b61ffc9711bee58597
2020-12-24 14:59:26 +08:00

273 lines
4.8 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3566.dtsi"
#include "rk3566-evb.dtsi"
/ {
model = "Rockchip RK3566 EVB1 DDR4 V10 Board";
compatible = "rockchip,rk3566-evb1-ddr4-v10", "rockchip,rk3568";
pcie20_3v3: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "pcie20_3v3";
regulator-min-microvolt = <0100000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
gpios-states = <0x1>;
states = <0100000 0x0
3300000 0x1>;
};
rk_headset: rk-headset {
compatible = "rockchip_headset";
headset_gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&hp_det>;
};
vcc3v3_vga: vcc3v3-vga {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_vga";
regulator-always-on;
regulator-boot-on;
gpio = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vcc3v3_sys>;
};
};
&audiopwmout_diff {
status = "disabled";
};
&combphy1_usq {
status = "okay";
};
&combphy2_psq {
status = "disabled";
};
&dig_acodec {
status = "disabled";
rockchip,pwm-output-mode;
pinctrl-names = "default";
pinctrl-0 = <&audiopwm_loutp
&audiopwm_loutn
&audiopwm_routp
&audiopwm_routn
>;
};
/*
* mipi_dphy0 needs to be enabled
* when dsi0 is enabled
*/
&dsi0 {
status = "okay";
};
&dsi0_in_vp0 {
status = "okay";
};
&dsi0_in_vp1 {
status = "disabled";
};
&dsi0_panel {
power-supply = <&vcc3v3_lcd0_n>;
reset-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&lcd0_rst_gpio>;
};
/*
* mipi_dphy1 needs to be enabled
* when dsi1 is enabled
*/
&dsi1 {
status = "disabled";
};
&dsi1_in_vp0 {
status = "disabled";
};
&dsi1_in_vp1 {
status = "disabled";
};
&dsi1_panel {
power-supply = <&vcc3v3_lcd1_n>;
reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&lcd1_rst_gpio>;
};
&edp {
hpd-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&edp_phy {
status = "okay";
};
&edp_in_vp0 {
status = "okay";
};
&edp_in_vp1 {
status = "disabled";
};
/*
* power-supply should switche to vcc3v3_lcd1_n
* when mipi panel is connected to dsi1.
*/
&gt1x {
power-supply = <&vcc3v3_lcd0_n>;
};
&hdmi {
rockchip,phy-table =
<92812500 0x8009 0x0000 0x0270>,
<165000000 0x800b 0x0000 0x026d>,
<185625000 0x800b 0x0000 0x01ed>,
<297000000 0x800b 0x0000 0x01ad>,
<594000000 0x8029 0x0000 0x0088>,
<000000000 0x0000 0x0000 0x0000>;
};
&i2s3_2ch {
status = "disabled";
};
&mipi_dphy0 {
status = "okay";
};
&mipi_dphy1 {
status = "disabled";
};
&pcie2x1 {
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&pcie20_3v3>;
status = "disabled";
};
&pdm {
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&pdmm1_clk1
&pdmm1_sdi1
&pdmm1_sdi2
&pdmm1_sdi3>;
};
&pdmics {
status = "disabled";
};
&pdm_mic_array {
status = "disabled";
};
&route_dsi0 {
status = "okay";
};
&sdmmc2 {
max-frequency = <150000000>;
supports-sdio;
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
sd-uhs-sdr104;
logic-remove-card;
status = "okay";
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn>;
};
&vcc3v3_lcd0_n {
gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
&vcc3v3_lcd1_n {
gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
&wireless_bluetooth {
uart_rts_gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "rts_gpio";
pinctrl-0 = <&uart1m1_rtsn>;
pinctrl-1 = <&uart1_gpios>;
BT,reset_gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
BT,wake_gpio = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
BT,wake_host_irq = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&wireless_wlan {
pinctrl-names = "default";
pinctrl-0 = <&wifi_poweren &wifi_host_wake_irq>;
WIFI,poweren_gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
};
&pinctrl {
headphone {
hp_det: hp-det {
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
lcd0 {
lcd0_rst_gpio: lcd0-rst-gpio {
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
lcd1 {
lcd1_rst_gpio: lcd1-rst-gpio {
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wireless-wlan {
wifi_poweren: wifi-poweren {
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_host_wake_irq: wifi-host-wake-irq {
rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
wireless-bluetooth {
uart1_gpios: uart1-gpios {
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};