Signed-off-by: Alex Zhao <zzc@rock-chips.com> Change-Id: I2859c7e701ae7f023894e19a2e9fd96f6f5df9db
269 lines
4.8 KiB
Plaintext
269 lines
4.8 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include "rk3566.dtsi"
|
|
#include "rk3566-evb.dtsi"
|
|
|
|
/ {
|
|
model = "Rockchip RK3566 EVB1 DDR4 V10 Board";
|
|
compatible = "rockchip,rk3566-evb1-ddr4-v10", "rockchip,rk3568";
|
|
|
|
pcie20_3v3: gpio-regulator {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "pcie20_3v3";
|
|
regulator-min-microvolt = <0100000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
gpios-states = <0x1>;
|
|
states = <0100000 0x0
|
|
3300000 0x1>;
|
|
};
|
|
|
|
rk_headset: rk-headset {
|
|
compatible = "rockchip_headset";
|
|
headset_gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hp_det>;
|
|
};
|
|
|
|
vcc3v3_vga: vcc3v3-vga {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_vga";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
};
|
|
};
|
|
|
|
&audiopwmout_diff {
|
|
status = "disabled";
|
|
};
|
|
|
|
&combphy1_usq {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2_psq {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dig_acodec {
|
|
status = "disabled";
|
|
rockchip,pwm-output-mode;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&audiopwm_loutp
|
|
&audiopwm_loutn
|
|
&audiopwm_routp
|
|
&audiopwm_routn
|
|
>;
|
|
};
|
|
|
|
/*
|
|
* mipi_dphy0 needs to be enabled
|
|
* when dsi0 is enabled
|
|
*/
|
|
&dsi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi0_in_vp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi0_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi0_panel {
|
|
power-supply = <&vcc3v3_lcd0_n>;
|
|
reset-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd0_rst_gpio>;
|
|
};
|
|
|
|
/*
|
|
* mipi_dphy1 needs to be enabled
|
|
* when dsi1 is enabled
|
|
*/
|
|
&dsi1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi1_in_vp0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi1_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi1_panel {
|
|
power-supply = <&vcc3v3_lcd1_n>;
|
|
reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd1_rst_gpio>;
|
|
};
|
|
|
|
&edp {
|
|
hpd-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&edp_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&edp_in_vp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&edp_in_vp1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
/*
|
|
* power-supply should switche to vcc3v3_lcd1_n
|
|
* when mipi panel is connected to dsi1.
|
|
*/
|
|
>1x {
|
|
power-supply = <&vcc3v3_lcd0_n>;
|
|
};
|
|
|
|
&hdmi {
|
|
rockchip,phy-table =
|
|
<92812500 0x8009 0x0000 0x0270>,
|
|
<165000000 0x800b 0x0000 0x026d>,
|
|
<185625000 0x800b 0x0000 0x01ed>,
|
|
<297000000 0x800b 0x0000 0x01ad>,
|
|
<594000000 0x8029 0x0000 0x0088>,
|
|
<000000000 0x0000 0x0000 0x0000>;
|
|
};
|
|
|
|
&i2s3_2ch {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mipi_dphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mipi_dphy1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pcie2x1 {
|
|
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&pcie20_3v3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&pdm {
|
|
status = "disabled";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pdmm1_clk1
|
|
&pdmm1_sdi1
|
|
&pdmm1_sdi2
|
|
&pdmm1_sdi3>;
|
|
};
|
|
|
|
&pdmics {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pdm_mic_array {
|
|
status = "disabled";
|
|
};
|
|
|
|
&sdmmc2 {
|
|
max-frequency = <150000000>;
|
|
supports-sdio;
|
|
bus-width = <4>;
|
|
disable-wp;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
|
|
sd-uhs-sdr104;
|
|
logic-remove-card;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn>;
|
|
};
|
|
|
|
&vcc3v3_lcd0_n {
|
|
gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
&vcc3v3_lcd1_n {
|
|
gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
&wireless_bluetooth {
|
|
uart_rts_gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart1m1_rtsn>;
|
|
pinctrl-1 = <&uart1_gpios>;
|
|
BT,reset_gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_gpio = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_host_irq = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wireless_wlan {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_poweren &wifi_host_wake_irq>;
|
|
WIFI,poweren_gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
|
|
WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&pinctrl {
|
|
headphone {
|
|
hp_det: hp-det {
|
|
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
lcd0 {
|
|
lcd0_rst_gpio: lcd0-rst-gpio {
|
|
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
lcd1 {
|
|
lcd1_rst_gpio: lcd1-rst-gpio {
|
|
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_poweren: wifi-poweren {
|
|
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
|
rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart1_gpios: uart1-gpios {
|
|
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|