Files
rockchip-kernel/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
Krzysztof Kozlowski 07099a5518 arm64: dts: rockchip: correct panel supplies on Odroid Go Super
The Anbernic and Odroid Go have different panels and take differently
named supplies, so move all the supplies to DTS defining actual panel to
fix warnings like:

  rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property
  rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-04-05 19:39:39 +02:00

189 lines
4.5 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Hardkernel Co., Ltd
* Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
* Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
*/
/dts-v1/;
#include "rk3326-odroid-go.dtsi"
/ {
model = "ODROID-GO Super";
compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
joystick_mux_controller: mux-controller {
compatible = "gpio-mux";
pinctrl = <&mux_en_pins>;
#mux-control-cells = <0>;
mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
<&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
};
joystick_mux: adc-mux {
compatible = "io-channel-mux";
io-channels = <&saradc 1>;
io-channel-names = "parent";
#io-channel-cells = <1>;
mux-controls = <&joystick_mux_controller>;
channels = "0", "1", "2", "3";
};
analog_sticks: adc-joystick {
compatible = "adc-joystick";
io-channels = <&joystick_mux 0>,
<&joystick_mux 1>,
<&joystick_mux 2>,
<&joystick_mux 3>;
poll-interval = <60>;
#address-cells = <1>;
#size-cells = <0>;
axis@0 {
reg = <0>;
abs-flat = <10>;
abs-fuzz = <10>;
abs-range = <180 800>;
linux,code = <ABS_X>;
};
axis@1 {
reg = <1>;
abs-flat = <10>;
abs-fuzz = <10>;
abs-range = <180 800>;
linux,code = <ABS_RX>;
};
axis@2 {
reg = <2>;
abs-flat = <10>;
abs-fuzz = <10>;
abs-range = <180 800>;
linux,code = <ABS_Y>;
};
axis@3 {
reg = <3>;
abs-flat = <10>;
abs-fuzz = <10>;
abs-range = <180 800>;
linux,code = <ABS_RY>;
};
};
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <4000000>;
charge-term-current-microamp = <300000>;
constant-charge-current-max-microamp = <2000000>;
constant-charge-voltage-max-microvolt = <4200000>;
factory-internal-resistance-micro-ohms = <180000>;
voltage-max-design-microvolt = <4100000>;
voltage-min-design-microvolt = <3500000>;
ocv-capacity-celsius = <20>;
ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
<3574170 0>;
};
gpio-keys-vol {
compatible = "gpio-keys";
autorepeat;
pinctrl-0 = <&btn_pins_vol>;
pinctrl-names = "default";
button-vol-down {
gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
label = "VOLUMEDOWN";
linux,code = <KEY_VOLUMEDOWN>;
};
button-volume-up {
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
label = "VOLUMEUP";
linux,code = <KEY_VOLUMEUP>;
};
};
};
/* f1 and f2 conflict with volume buttons */
/delete-node/ &btn_f1;
/delete-node/ &btn_f2;
&builtin_gamepad {
button-sw19 {
gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
label = "SELECT";
linux,code = <BTN_SELECT>;
};
/* note that TR2 and TL2 are swapped */
button-sw20 {
gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
label = "TOP-RIGHT 2";
linux,code = <BTN_TR2>;
};
button-sw21 {
gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
label = "TOP-LEFT 2";
linux,code = <BTN_TL2>;
};
button-sw22 {
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
label = "START";
linux,code = <BTN_START>;
};
};
&internal_display {
compatible = "elida,kd50t048a", "sitronix,st7701";
reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
IOVCC-supply = <&vcc_lcd>;
VCC-supply = <&vcc_lcd>;
};
&rk817_charger {
monitored-battery = <&battery>;
};
&pinctrl {
btns {
btn_pins: btn-pins {
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
};
btn_pins_vol: btn-pins-vol {
rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
joystick {
mux_en_pins: mux-pins {
rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
};
};
};