724ba67515
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
138 lines
2.5 KiB
Plaintext
138 lines
2.5 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Google Veyron Pinky Rev 2 board device tree source
|
|
*
|
|
* Copyright 2015 Google, Inc
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "rk3288-veyron-chromebook.dtsi"
|
|
#include "../cros-ec-sbs.dtsi"
|
|
|
|
/ {
|
|
model = "Google Pinky";
|
|
compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
|
|
"google,veyron", "rockchip,rk3288";
|
|
|
|
/delete-node/backlight-regulator;
|
|
/delete-node/panel-regulator;
|
|
/delete-node/emmc-pwrseq;
|
|
/delete-node/vcc18-lcd;
|
|
};
|
|
|
|
&backlight {
|
|
/delete-property/power-supply;
|
|
};
|
|
|
|
&emmc {
|
|
/*
|
|
* Use a pullup instead of a drive since the output is 3.3V and
|
|
* really should be 1.8V (oops). The external pulldown will help
|
|
* bring the voltage down if we only drive with a pullup here.
|
|
* Therefore disable the powerseq (and actual reset) for pinky.
|
|
*/
|
|
/delete-property/mmc-pwrseq;
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
|
|
};
|
|
|
|
&edp {
|
|
/delete-property/pinctrl-names;
|
|
/delete-property/pinctrl-0;
|
|
|
|
force-hpd;
|
|
};
|
|
|
|
&lid_switch {
|
|
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
|
|
|
|
key-power {
|
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
/* Touchpad connector */
|
|
&i2c3 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
i2c-scl-falling-time-ns = <50>;
|
|
i2c-scl-rising-time-ns = <300>;
|
|
};
|
|
|
|
&panel {
|
|
power-supply = <&vcc33_lcd>;
|
|
};
|
|
|
|
&pinctrl {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <
|
|
/* Common for sleep and wake, but no owners */
|
|
&ddr0_retention
|
|
&ddrio_pwroff
|
|
&global_pwroff
|
|
|
|
/* Wake only */
|
|
&suspend_l_wake
|
|
&bt_dev_wake_awake
|
|
>;
|
|
pinctrl-1 = <
|
|
/* Common for sleep and wake, but no owners */
|
|
&ddr0_retention
|
|
&ddrio_pwroff
|
|
&global_pwroff
|
|
|
|
/* Sleep only */
|
|
&suspend_l_sleep
|
|
&bt_dev_wake_sleep
|
|
>;
|
|
|
|
/delete-node/ lcd;
|
|
|
|
backlight {
|
|
/delete-node/ bl_pwr_en;
|
|
};
|
|
|
|
buttons {
|
|
pwr_key_h: pwr-key-h {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
emmc {
|
|
emmc_reset: emmc-reset {
|
|
rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
sdmmc {
|
|
sdmmc_wp_pin: sdmmc-wp-pin {
|
|
rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rk808 {
|
|
regulators {
|
|
vcc18_lcd: SWITCH_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc18_lcd";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdmmc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
|
|
&sdmmc_wp_pin &sdmmc_bus4>;
|
|
wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&tsadc {
|
|
/* Some connection is flaky making the tsadc hang the system */
|
|
status = "disabled";
|
|
};
|