The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
185 lines
3.8 KiB
Plaintext
185 lines
3.8 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Google Veyron (and derivatives) board device tree source
|
|
* Chromebook specific parts
|
|
*
|
|
* Copyright 2015 Google, Inc
|
|
*/
|
|
|
|
#include <dt-bindings/clock/rockchip,rk808.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "rk3288-veyron.dtsi"
|
|
#include "rk3288-veyron-analog-audio.dtsi"
|
|
#include "rk3288-veyron-edp.dtsi"
|
|
#include "rk3288-veyron-sdmmc.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
/* Assign 20 so we don't get confused w/ builtin ones */
|
|
i2c20 = &i2c_tunnel;
|
|
};
|
|
|
|
gpio-charger {
|
|
compatible = "gpio-charger";
|
|
charger-type = "mains";
|
|
gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ac_present_ap>;
|
|
};
|
|
|
|
lid_switch: lid-switch {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ap_lid_int_l>;
|
|
|
|
switch-lid {
|
|
label = "Lid";
|
|
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
|
|
wakeup-source;
|
|
linux,code = <SW_LID>;
|
|
linux,input-type = <EV_SW>;
|
|
debounce-interval = <1>;
|
|
};
|
|
};
|
|
|
|
/* A non-regulated voltage from power supply or battery */
|
|
vccsys: vccsys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vccsys";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc33_sys: vcc33-sys {
|
|
vin-supply = <&vccsys>;
|
|
};
|
|
|
|
vcc_5v: vcc-5v {
|
|
vin-supply = <&vccsys>;
|
|
};
|
|
|
|
/* This turns on vbus for host1 (dwc2) */
|
|
vcc5_host1: vcc5-host1-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&host1_pwr_en>;
|
|
regulator-name = "vcc5_host1";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* This turns on vbus for otg for host mode (dwc2) */
|
|
vcc5v_otg: vcc5v-otg-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbotg_pwren_h>;
|
|
regulator-name = "vcc5_host2";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&rk808 {
|
|
vcc11-supply = <&vcc_5v>;
|
|
|
|
regulators {
|
|
vcc33_ccd: LDO_REG8 {
|
|
regulator-name = "vcc33_ccd";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
cros_ec: ec@0 {
|
|
compatible = "google,cros-ec-spi";
|
|
reg = <0>;
|
|
google,cros-ec-spi-pre-delay = <30>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ec_int>;
|
|
spi-max-frequency = <3000000>;
|
|
|
|
i2c_tunnel: i2c-tunnel {
|
|
compatible = "google,cros-ec-i2c-tunnel";
|
|
google,remote-bus = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
trackpad@15 {
|
|
compatible = "elan,ekth3000";
|
|
reg = <0x15>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&trackpad_int>;
|
|
vcc-supply = <&vcc33_io>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
buttons {
|
|
ap_lid_int_l: ap-lid-int-l {
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
charger {
|
|
ac_present_ap: ac-present-ap {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
cros-ec {
|
|
ec_int: ec-int {
|
|
rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
suspend {
|
|
suspend_l_wake: suspend-l-wake {
|
|
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
|
|
};
|
|
|
|
suspend_l_sleep: suspend-l-sleep {
|
|
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
};
|
|
|
|
trackpad {
|
|
trackpad_int: trackpad-int {
|
|
rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
usb-host {
|
|
host1_pwr_en: host1-pwr-en {
|
|
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usbotg_pwren_h: usbotg-pwren-h {
|
|
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "../cros-ec-keyboard.dtsi"
|