4f3c5c6bc7
Type: Function Redmine ID: #N/A Associated modifications: I649a447919003574d907b83b10ba3fd7496ad492 Test: N/A Signed-off-by: Zhibin Huang <zhibin.huang@rock-chips.com> Change-Id: I310e7bf9f743accd3bc9b1f26c30a6b4fc3cd3c7
604 lines
11 KiB
Plaintext
604 lines
11 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2025 Rockchip Electronics Co., Ltd.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "rv1126b.dtsi"
|
|
#include "rv1126b-evb.dtsi"
|
|
|
|
/ {
|
|
model = "Rockchip RV1126B EVB3 V10 Board";
|
|
compatible = "rockchip,rv1126b-evb3-v10", "rockchip,rv1126b";
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
vcc5v0_dcin: vcc5v0-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc5v0_host: vcc5v0-host {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_host";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio7 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_dcin>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_host_en>;
|
|
};
|
|
|
|
vccsys_stb: vccsys-stb {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vccsys_stb";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_dcin>;
|
|
};
|
|
|
|
vcc3v3_stb: vcc3v3-stb {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_stb";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vccsys_stb>;
|
|
};
|
|
|
|
vcc1v8_pmu: vdd1_1v8_ddr: vcc1v8_pmu {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_stb";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vccsys_stb>;
|
|
};
|
|
|
|
vcc_ddr: vcc_ddr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
vin-supply = <&vccsys_stb>;
|
|
};
|
|
|
|
vcc3v3_pmu: vcc3v3-pmu {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vccsys_stb>;
|
|
};
|
|
|
|
vcc0v9_pmu: vcc0v9-pmu {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc0v9_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
vin-supply = <&vcc1v8_pmu>;
|
|
};
|
|
|
|
vcc_mipi: vcc-mipi {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_mipi";
|
|
gpio = <&gpio7 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc_1v8: vcc-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc3v3_stb>;
|
|
};
|
|
|
|
vcc_3v3: vcc3v3_dev: vcc-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vccsys_stb>;
|
|
};
|
|
|
|
vcc_sd: vcc-sd {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_LOW>;
|
|
regulator-name = "vcc_sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-low;
|
|
vin-supply = <&vcc_3v3>;
|
|
};
|
|
|
|
vccio_sd: vccio-sd {
|
|
compatible = "regulator-gpio";
|
|
regulator-boot-on;
|
|
regulator-name = "vccio_sd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpios = <&gpio7 RK_PA3 GPIO_ACTIVE_LOW>;
|
|
vin-supply = <&vccsys_stb>;
|
|
states = <1800000 0x0
|
|
3300000 0x1>;
|
|
};
|
|
|
|
vdd_log: vdd-log {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm1_4ch_2 0 25000 1>;
|
|
regulator-name = "vdd_log";
|
|
regulator-init-microvolt = <905000>;
|
|
regulator-min-microvolt = <810000>;
|
|
regulator-max-microvolt = <1006000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
pwm-supply = <&vccsys_stb>;
|
|
status = "okay";
|
|
};
|
|
|
|
vdd_cpu: vdd-cpu {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm1_4ch_0 0 25000 1>;
|
|
regulator-name = "vdd_cpu";
|
|
regulator-init-microvolt = <950000>;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
pwm-supply = <&vccsys_stb>;
|
|
status = "okay";
|
|
};
|
|
|
|
vdd_npu: vdd-npu {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm1_4ch_1 0 25000 1>;
|
|
regulator-name = "vdd_npu";
|
|
regulator-init-microvolt = <950000>;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
pwm-supply = <&vccsys_stb>;
|
|
status = "okay";
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
uart_rts_gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart2m0_rtsn_pins>;
|
|
pinctrl-1 = <&uart2_gpios>;
|
|
BT,power_gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
wireless-wlan {
|
|
compatible = "wlan-platdata";
|
|
rockchip,grf = <&grf>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_wake_host>;
|
|
wifi_chip_type = "rk96x";
|
|
WIFI,host_wake_irq = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&backlight {
|
|
pwms = <&pwm2_8ch_7 0 25000 0>;
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&csi2_dphy3 {
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
csi_dphy3_input0: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&ps5458_out>;
|
|
data-lanes = <1 2>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
csidphy3_out: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&mipi2_csi2_input>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&display_subsystem {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi_in_vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi_panel {
|
|
power-supply = <&vcc_mipi>;
|
|
};
|
|
|
|
&fspi0 {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <100000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <1>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2c2m0_pins>;
|
|
|
|
ps5458: ps5458@4c {
|
|
compatible = "prime,ps5458";
|
|
reg = <0x4c>;
|
|
clocks = <&cru CLK_MIPI2_OUT2IO>;
|
|
clock-names = "xvclk";
|
|
reset-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam_clk2_pins>;
|
|
rockchip,camera-module-index = <0>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "default";
|
|
rockchip,camera-module-lens-name = "default";
|
|
port {
|
|
ps5458_out: endpoint {
|
|
remote-endpoint = <&csi_dphy3_input0>;
|
|
data-lanes = <1 2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4m3_pins>;
|
|
|
|
gt1x: gt1x@14 {
|
|
compatible = "goodix,gt1x";
|
|
reg = <0x14>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&touch_gpio>;
|
|
power-supply = <&vcc_mipi>;
|
|
goodix,rst-gpio = <&gpio5 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
goodix,irq-gpio = <&gpio3 RK_PB7 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
hynitron: hynitron@5a {
|
|
compatible = "hyn,3240";
|
|
reg = <0x5a>;
|
|
power-supply = <&vcc_mipi>;
|
|
|
|
pinctrl-names = "ts_active","ts_suspend";
|
|
pinctrl-0 = <&ts_int_active &ts_reset_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
|
|
reset-gpios = <&gpio5 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
irq-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
|
|
max-touch-number = <5>;
|
|
display-coords = <0 0 1080 1920>;
|
|
pos-swap = <0>;
|
|
posx-reverse = <0>;
|
|
posy-reverse = <0>;
|
|
};
|
|
};
|
|
|
|
&mipi2_csi2 {
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mipi2_csi2_input: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&csidphy3_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mipi2_csi2_output: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&cif_mipi_in2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mipi_dphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkaiisp {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkaiisp_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkaiisp_vir0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkcif {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkcif_mipi_lvds2 {
|
|
status = "okay";
|
|
|
|
port {
|
|
cif_mipi_in2: endpoint {
|
|
remote-endpoint = <&mipi2_csi2_output>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rkcif_mipi_lvds2_sditf {
|
|
status = "okay";
|
|
|
|
port {
|
|
mipi_lvds2_sditf: endpoint {
|
|
remote-endpoint = <&isp_vir0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rkcif_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkisp {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkisp_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkisp_vir0 {
|
|
status = "okay";
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
isp_vir0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&mipi_lvds2_sditf>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rkisp_vir0_sditf {
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu {
|
|
rknpu-supply = <&vdd_npu>;
|
|
};
|
|
|
|
&route_dsi {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvpss {
|
|
status = "okay";
|
|
dvbm = <&rkdvbm>;
|
|
};
|
|
|
|
&rkvpss_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvpss_vir0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rockchip_suspend {
|
|
status = "okay";
|
|
|
|
rockchip,sleep-debug-en = <1>;
|
|
|
|
rockchip,sleep-pin-config = <
|
|
(0
|
|
)
|
|
>;
|
|
rockchip,sleep-mode-config = <
|
|
(0
|
|
| RKPM_SLP_ARMOFF_LOGOFF
|
|
| RKPM_SLP_PMU_PMUALIVE_32K
|
|
| RKPM_SLP_PMU_DIS_OSC
|
|
| RKPM_SLP_LP_PR
|
|
)
|
|
>;
|
|
};
|
|
|
|
&rtc {
|
|
rockchip,rtc-suspend-bypass;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
touch {
|
|
touch_gpio: touch-gpio {
|
|
rockchip,pins =
|
|
<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<5 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
ts_int_active: ts_int_active {
|
|
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
ts_reset_active: ts_reset_active {
|
|
rockchip,pins = <5 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
ts_int_suspend: ts_int_suspend {
|
|
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
ts_reset_suspend: ts_reset_suspend {
|
|
rockchip,pins = <5 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
vcc5v0_host_en: vcc5v0-host-en {
|
|
rockchip,pins = <7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart2_gpios: uart2-gpios {
|
|
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_wake_host: wifi-wake-host {
|
|
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm1_4ch_0 {
|
|
pinctrl-0 = <&pwm1m2_ch0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm1_4ch_1 {
|
|
pinctrl-0 = <&pwm1m2_ch1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm1_4ch_2 {
|
|
pinctrl-0 = <&pwm1m2_ch2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2_8ch_7 {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc0 {
|
|
vref-supply = <&vcc_1v8>;
|
|
};
|
|
|
|
&sdmmc0 {
|
|
max-frequency = <200000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_sd>;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2m0_xfer_pins &uart2m0_ctsn_pins>;
|
|
};
|
|
|
|
&usb2phy_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
};
|
|
|
|
&usb3phy {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_drd_dwc3 {
|
|
dr_mode = "otg";
|
|
extcon = <&usb2phy>;
|
|
maximum-speed = "high-speed";
|
|
phys = <&usb2phy_otg>;
|
|
phy-names = "usb2-phy";
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,usb2-lpm-disable;
|
|
};
|