Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Pull io_uring zerocopy support from Jens Axboe:
"This adds support for efficient support for zerocopy sends through
io_uring. Both ipv4 and ipv6 is supported, as well as both TCP and
UDP.
The core network changes to support this is in a stable branch from
Jakub that both io_uring and net-next has pulled in, and the io_uring
changes are layered on top of that.
All of the work has been done by Pavel"
* tag 'for-5.20/io_uring-zerocopy-send-2022-07-29' of git://git.kernel.dk/linux-block: (34 commits)
io_uring: notification completion optimisation
io_uring: export req alloc from core
io_uring/net: use unsigned for flags
io_uring/net: make page accounting more consistent
io_uring/net: checks errors of zc mem accounting
io_uring/net: improve io_get_notif_slot types
selftests/io_uring: test zerocopy send
io_uring: enable managed frags with register buffers
io_uring: add zc notification flush requests
io_uring: rename IORING_OP_FILES_UPDATE
io_uring: flush notifiers after sendzc
io_uring: sendzc with fixed buffers
io_uring: allow to pass addr into sendzc
io_uring: account locked pages for non-fixed zc
io_uring: wire send zc request type
io_uring: add notification slot registration
io_uring: add rsrc referencing for notifiers
io_uring: complete notifiers in tw
io_uring: cache struct io_notif
io_uring: add zc notification infrastructure
...
Pull io_uring updates from Jens Axboe:
- As per (valid) complaint in the last merge window, fs/io_uring.c has
grown quite large these days. io_uring isn't really tied to fs
either, as it supports a wide variety of functionality outside of
that.
Move the code to io_uring/ and split it into files that either
implement a specific request type, and split some code into helpers
as well. The code is organized a lot better like this, and io_uring.c
is now < 4K LOC (me).
- Deprecate the epoll_ctl opcode. It'll still work, just trigger a
warning once if used. If we don't get any complaints on this, and I
don't expect any, then we can fully remove it in a future release
(me).
- Improve the cancel hash locking (Hao)
- kbuf cleanups (Hao)
- Efficiency improvements to the task_work handling (Dylan, Pavel)
- Provided buffer improvements (Dylan)
- Add support for recv/recvmsg multishot support. This is similar to
the accept (or poll) support for have for multishot, where a single
SQE can trigger everytime data is received. For applications that
expect to do more than a few receives on an instantiated socket, this
greatly improves efficiency (Dylan).
- Efficiency improvements for poll handling (Pavel)
- Poll cancelation improvements (Pavel)
- Allow specifiying a range for direct descriptor allocations (Pavel)
- Cleanup the cqe32 handling (Pavel)
- Move io_uring types to greatly cleanup the tracing (Pavel)
- Tons of great code cleanups and improvements (Pavel)
- Add a way to do sync cancelations rather than through the sqe -> cqe
interface, as that's a lot easier to use for some use cases (me).
- Add support to IORING_OP_MSG_RING for sending direct descriptors to a
different ring. This avoids the usually problematic SCM case, as we
disallow those. (me)
- Make the per-command alloc cache we use for apoll generic, place
limits on it, and use it for netmsg as well (me).
- Various cleanups (me, Michal, Gustavo, Uros)
* tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits)
io_uring: ensure REQ_F_ISREG is set async offload
net: fix compat pointer in get_compat_msghdr()
io_uring: Don't require reinitable percpu_ref
io_uring: fix types in io_recvmsg_multishot_overflow
io_uring: Use atomic_long_try_cmpxchg in __io_account_mem
io_uring: support multishot in recvmsg
net: copy from user before calling __get_compat_msghdr
net: copy from user before calling __copy_msghdr
io_uring: support 0 length iov in buffer select in compat
io_uring: fix multishot ending when not polled
io_uring: add netmsg cache
io_uring: impose max limit on apoll cache
io_uring: add abstraction around apoll cache
io_uring: move apoll cache to poll.c
io_uring: consolidate hash_locked io-wq handling
io_uring: clear REQ_F_HASH_LOCKED on hash removal
io_uring: don't race double poll setting REQ_F_ASYNC_DATA
io_uring: don't miss setting REQ_F_DOUBLE_POLL
io_uring: disable multishot recvmsg
io_uring: only trace one of complete or overflow
...
Pull perf events updates from Ingo Molnar:
- Fix Intel Alder Lake PEBS memory access latency & data source
profiling info bugs.
- Use Intel large-PEBS hardware feature in more circumstances, to
reduce PMI overhead & reduce sampling data.
- Extend the lost-sample profiling output with the PERF_FORMAT_LOST ABI
variant, which tells tooling the exact number of samples lost.
- Add new IBS register bits definitions.
- AMD uncore events: Add PerfMonV2 DF (Data Fabric) enhancements.
* tag 'perf-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/ibs: Add new IBS register bits into header
perf/x86/intel: Fix PEBS data source encoding for ADL
perf/x86/intel: Fix PEBS memory access info encoding for ADL
perf/core: Add a new read format to get a number of lost samples
perf/x86/amd/uncore: Add PerfMonV2 RDPMC assignments
perf/x86/amd/uncore: Add PerfMonV2 DF event format
perf/x86/amd/uncore: Detect available DF counters
perf/x86/amd/uncore: Use attr_update for format attributes
perf/x86/amd/uncore: Use dynamic events array
x86/events/intel/ds: Enable large PEBS for PERF_SAMPLE_WEIGHT_TYPE
Pull fsnotify updates from Jan Kara:
- support for FAN_MARK_IGNORE which untangles some of the not well
defined corner cases with fanotify ignore masks
- small cleanups
* tag 'fsnotify_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Fix comment typo
fanotify: introduce FAN_MARK_IGNORE
fanotify: cleanups for fanotify_mark() input validations
fanotify: prepare for setting event flags in ignore mask
fs: inotify: Fix typo in inotify comment
Overlay notification control onto IORING_OP_RSRC_UPDATE (former
IORING_OP_FILES_UPDATE). It allows to flush a range of zc notifications
from slots with indexes [sqe->off, sqe->off+sqe->len). If sqe->arg is
not zero, it also copies sqe->arg as a new tag for all flushed
notifications.
Note, it doesn't flush a notification of a slot if there was no requests
attached to it (since last flush or registration).
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/df13e2363400682a73dd9e71c3b990b8d1ff0333.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Similar to multishot recv, this will require provided buffers to be
used. However recvmsg is much more complex than recv as it has multiple
outputs. Specifically flags, name, and control messages.
Support this by introducing a new struct io_uring_recvmsg_out with 4
fields. namelen, controllen and flags match the similar out fields in
msghdr from standard recvmsg(2), payloadlen is the length of the payload
following the header.
This struct is placed at the start of the returned buffer. Based on what
the user specifies in struct msghdr, the next bytes of the buffer will be
name (the next msg_namelen bytes), and then control (the next
msg_controllen bytes). The payload will come at the end. The return value
in the CQE is the total used size of the provided buffer.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220714110258.1336200-4-dylany@fb.com
[axboe: style fixups, see link]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support multishot receive for io_uring.
Typical server applications will run a loop where for each recv CQE it
requeues another recv/recvmsg.
This can be simplified by using the existing multishot functionality
combined with io_uring's provided buffers.
The API is to add the IORING_RECV_MULTISHOT flag to the SQE. CQEs will
then be posted (with IORING_CQE_F_MORE flag set) when data is available
and is read. Once an error occurs or the socket ends, the multishot will
be removed and a completion without IORING_CQE_F_MORE will be posted.
The benefit to this is that the recv is much more performant.
* Subsequent receives are queued up straight away without requiring the
application to finish a processing loop.
* If there are more data in the socket (sat the provided buffer size is
smaller than the socket buffer) then the data is immediately
returned, improving batching.
* Poll is only armed once and reused, saving CPU cycles
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220630091231.1456789-11-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
From recently io_uring provides an option to allocate a file index for
operation registering fixed files. However, it's utterly unusable with
mixed approaches when for a part of files the userspace knows better
where to place it, as it may race and users don't have any sane way to
pick a slot and hoping it will not be taken.
Let the userspace to register a range of fixed file slots in which the
auto-allocation happens. The use case is splittting the fixed table in
two parts, where on of them is used for auto-allocation and another for
slot-specified operations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/66ab0394e436f38437cf7c44676e1920d09687ad.1656154403.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With IORING_OP_MSG_RING, one ring can send a message to another ring.
Extend that support to also allow sending a fixed file descriptor to
that ring, enabling one ring to pass a registered descriptor to another
one.
Arguments are extended to pass in:
sqe->addr3 fixed file slot in source ring
sqe->file_index fixed file slot in destination ring
IORING_OP_MSG_RING is extended to take a command argument in sqe->addr.
If set to zero (or IORING_MSG_DATA), it sends just a message like before.
If set to IORING_MSG_SEND_FD, a fixed file descriptor is sent according
to the above arguments.
Two common use cases for this are:
1) Server needs to be shutdown or restarted, pass file descriptors to
another onei
2) Backend is split, and one accepts connections, while others then get
the fd passed and handle the actual connection.
Both of those are classic SCM_RIGHTS use cases, and it's not possible to
support them with direct descriptors today.
By default, this will post a CQE to the target ring, similarly to how
IORING_MSG_DATA does it. If IORING_MSG_RING_CQE_SKIP is set, no message
is posted to the target ring. The issuer is expected to notify the
receiver side separately.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io_uring cancelation API is async, like any other API that we expose
there. For the case of finding a request to cancel, or not finding one,
it is fully sync in that when submission returns, the CQE for both the
cancelation request and the targeted request have been posted to the
CQ ring.
However, if the targeted work is being executed by io-wq, the API can
only start the act of canceling it. This makes it difficult to use in
some circumstances, as the caller then has to wait for the CQEs to come
in and match on the same cancelation data there.
Provide a IORING_REGISTER_SYNC_CANCEL command for io_uring_register()
that does sync cancelations, always. For the io-wq case, it'll wait
for the cancelation to come in before returning. The only expected
returns from this API is:
0 Request found and canceled fine.
> 0 Requests found and canceled. Only happens if asked to
cancel multiple requests, and if the work wasn't in
progress.
-ENOENT Request not found.
-ETIME A timeout on the operation was requested, but the timeout
expired before we could cancel.
and we won't get -EALREADY via this API.
If the timeout value passed in is -1 (tv_sec and tv_nsec), then that
means that no timeout is requested. Otherwise, the timespec passed in
is the amount of time the sync cancel will wait for a successful
cancelation.
Link: https://github.com/axboe/liburing/discussions/608
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for not having a request to pass in that carries this
state, add a separate cancelation flag that allows the caller to ask
for a fixed file for cancelation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default, the POLL_ADD command does edge triggered poll - if we get
a non-zero mask on the initial poll attempt, we complete the request
successfully.
Support level triggered by always waiting for a notification, regardless
of whether or not the initial mask matches the file state.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull kvm fixes from Paolo Bonzini:
- Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR
- Fix use of sched_setaffinity in selftests
- Sync kernel headers to tools
- Fix KVM_STATS_UNIT_MAX
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Protect the unused bits in MSR exiting flags
tools headers UAPI: Sync linux/kvm.h with the kernel sources
KVM: selftests: Fix target thread to be migrated in rseq_test
KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats
Userspace may support more features or new added flags, but the driver
side can be old, so make sure correct flags(features) returned to
userpsace, then userspace can work as expected.
Also mark the 2nd flags as reversed, just use the 1st one. When we run
out of flags, the reserved one can be handled at that time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220722103817.631258-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 1b870fa557 ("kvm: stats: tell userspace which values are
boolean") added a new stat unit (boolean) but failed to raise
KVM_STATS_UNIT_MAX.
Fix by pointing UNIT_MAX at the new max value of UNIT_BOOLEAN.
Fixes: 1b870fa557 ("kvm: stats: tell userspace which values are boolean")
Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220719125229.2934273-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull input fixes from Dmitry Torokhov:
- fix Goodix driver to properly behave on the Aya Neo Next
- some more sanity checks in usbtouchscreen driver
- a tweak in wm97xx driver in preparation for remove() to return void
- a clarification in input core regarding units of measurement for
resolution on touch events.
* tag 'input-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: document the units for resolution of size axes
Input: goodix - call acpi_device_fix_up_power() in some cases
Input: wm97xx - make .remove() obviously always return 0
Input: usbtouchscreen - add driver_info sanity check
Pull tty and serial driver fixes from Greg KH:
"Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
number of reported problems including:
- longtime bug in pty_write() that has been reported in the past.
- 8250 driver fixes
- new serial device ids
- vt overlapping data copy bugfix
- other tiny serial driver bugfixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
vt: fix memory overlapping when deleting chars in the buffer
serial: mvebu-uart: correctly report configured baudrate value
serial: 8250: Fix PM usage_count for console handover
serial: 8250: fix return error code in serial8250_request_std_resource()
serial: stm32: Clear prev values before setting RTS delays
tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver
serial: 8250: Fix __stop_tx() & DMA Tx restart races
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
tty: serial: samsung_tty: set dma burst_size to 1
serial: 8250: dw: enable using pdata with ACPI
Pull KVM fixes from Paolo Bonzini:
"RISC-V:
- Fix missing PAGE_PFN_MASK
- Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
x86:
- Fix for nested virtualization when TSC scaling is active
- Estimate the size of fastcc subroutines conservatively, avoiding
disastrous underestimation when return thunks are enabled
- Avoid possible use of uninitialized fields of 'struct
kvm_lapic_irq'
Generic:
- Mark as such the boolean values available from the statistics file
descriptors
- Clarify statistics documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: emulate: do not adjust size of fastop and setcc subroutines
KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
Documentation: kvm: clarify histogram units
kvm: stats: tell userspace which values are boolean
x86/kvm: fix FASTOP_SIZE when return thunks are enabled
KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
riscv: Fix missing PAGE_PFN_MASK
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to 66e4c8d950 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
Use task_work_add if it is available, since task_work_add can bring
up better performance, especially batching signaling ->ubq_daemon can
be done.
It is observed that task_work_add() can boost iops by +4% on random
4k io test. Also except for completing io command, all other code
paths are same with completing io command via
io_uring_cmd_complete_in_task.
Meantime add one flag of UBLK_F_URING_CMD_COMP_IN_TASK for comparing
the mode easily.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220713140711.97356-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the driver part of userspace block driver(ublk driver), the other
part is userspace daemon part(ublksrv)[1].
The two parts communicate by io_uring's IORING_OP_URING_CMD with one
shared cmd buffer for storing io command, and the buffer is read only for
ublksrv, each io command is indexed by io request tag directly, and is
written by ublk driver.
For example, when one READ io request is submitted to ublk block driver,
ublk driver stores the io command into cmd buffer first, then completes
one IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued
to ublk driver beforehand by ublksrv for getting notification of any new
io request, and each URING_CMD is associated with one io request by tag.
After ublksrv gets the io command, it translates and handles the ublk io
request, such as, for the ublk-loop target, ublksrv translates the request
into same request on another file or disk, like the kernel loop block
driver. In ublksrv's implementation, the io is still handled by io_uring,
and share same ring with IORING_OP_URING_CMD command. When the target io
request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
both committing io request result and getting future notification of new
io request.
Another thing done by ublk driver is to copy data between kernel io
request and ublksrv's io buffer:
1) before ubsrv handles WRITE request, copy the request's data into
ublksrv's userspace io buffer, so that ublksrv can handle the write
request
2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
into this READ request, then ublk driver can complete the READ request
Zero copy may be switched if mm is ready to support it.
ublk driver doesn't handle any logic of the specific user space driver,
so it is small/simple enough.
[1] ublksrv
https://github.com/ming1/ubdsrv
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220713140711.97356-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some of the statistics values exported by KVM are always only 0 or 1.
It can be useful to export this fact to userspace so that it can track
them specially (for example by polling the value every now and then to
compute a % of time spent in a specific state).
Therefore, add "boolean value" as a new "unit". While it is not exactly
a unit, it walks and quacks like one. In particular, using the type
would be wrong because boolean values could be instantaneous or peak
values (e.g. "is the rmap allocated?") or even two-bucket histograms
(e.g. "number of posted vs. non-posted interrupt injections").
Suggested-by: Amneesh Singh <natto@weirdnatto.in>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Today, the resolution of size axes is not documented. As a result, it's
not clear what the canonical interpretation of this value should be. On
Android, there is a need to calculate the size of the touch ellipse in
physical units (millimeters).
After reviewing linux source, it turned out that most of the existing
usages are already interpreting this value as "units/mm". This
documentation will make it explicit. This will help device
implementations with correctly following the linux specs, and will
ensure that the devices will work on Android without needing further
customized parameters for scaling of major/minor values.
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220520084514.3451193-1-svv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Daniel Borkmann says:
====================
bpf 2022-07-08
We've added 3 non-merge commits during the last 2 day(s) which contain
a total of 7 files changed, 40 insertions(+), 24 deletions(-).
The main changes are:
1) Fix cBPF splat triggered by skb not having a mac header, from Eric Dumazet.
2) Fix spurious packet loss in generic XDP when pushing packets out (note
that native XDP is not affected by the issue), from Johan Almbladh.
3) Fix bpf_dynptr_{read,write}() helper signatures with flag argument before
its set in stone as UAPI, from Joanne Koong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs
bpf: Make sure mac_header was set before using it
xdp: Fix spurious packet loss in generic XDP TX path
====================
Link: https://lore.kernel.org/r/20220708213418.19626-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull io_uring tweak from Jens Axboe:
"Just a minor tweak to an addition made in this release cycle: padding
a 32-bit value that's in a 64-bit union to avoid any potential
funkiness from that"
* tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
io_uring: explicit sqe padding for ioctl commands
Commit 13bbbfbea7 ("bpf: Add bpf_dynptr_read and bpf_dynptr_write")
added the bpf_dynptr_write() and bpf_dynptr_read() APIs.
However, it will be needed for some dynptr types to pass in flags as
well (e.g. when writing to a skb, the user may like to invalidate the
hash or recompute the checksum).
This patch adds a "u64 flags" arg to the bpf_dynptr_read() and
bpf_dynptr_write() APIs before their UAPI signature freezes where
we then cannot change them anymore with a 5.19.x released kernel.
Fixes: 13bbbfbea7 ("bpf: Add bpf_dynptr_read and bpf_dynptr_write")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220706232547.4016651-1-joannelkoong@gmail.com
Pull io_uring fixes from Jens Axboe:
"Two minor tweaks:
- While we still can, adjust the send/recv based flags to be in
->ioprio rather than in ->addr2. This is consistent with eg accept,
and also doesn't waste a full 64-bit field for flags (Pavel)
- 5.18-stable fix for re-importing provided buffers. Not much real
world relevance here as it'll only impact non-pollable files gone
async, which is more of a practical test case rather than something
that is used in the wild (Dylan)"
* tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
io_uring: fix provided buffer import
io_uring: keep sendrecv flags in ioprio
This flag is a new way to configure ignore mask which allows adding and
removing the event flags FAN_ONDIR and FAN_EVENT_ON_CHILD in ignore mask.
The legacy FAN_MARK_IGNORED_MASK flag would always ignore events on
directories and would ignore events on children depending on whether
the FAN_EVENT_ON_CHILD flag was set in the (non ignored) mask.
FAN_MARK_IGNORE can be used to ignore events on children without setting
FAN_EVENT_ON_CHILD in the mark's mask and will not ignore events on
directories unconditionally, only when FAN_ONDIR is set in ignore mask.
The new behavior is non-downgradable. After calling fanotify_mark() with
FAN_MARK_IGNORE once, calling fanotify_mark() with FAN_MARK_IGNORED_MASK
on the same object will return EEXIST error.
Setting the event flags with FAN_MARK_IGNORE on a non-dir inode mark
has no meaning and will return ENOTDIR error.
The meaning of FAN_MARK_IGNORED_SURV_MODIFY is preserved with the new
FAN_MARK_IGNORE flag, but with a few semantic differences:
1. FAN_MARK_IGNORED_SURV_MODIFY is required for filesystem and mount
marks and on an inode mark on a directory. Omitting this flag
will return EINVAL or EISDIR error.
2. An ignore mask on a non-directory inode that survives modify could
never be downgraded to an ignore mask that does not survive modify.
With new FAN_MARK_IGNORE semantics we make that rule explicit -
trying to update a surviving ignore mask without the flag
FAN_MARK_IGNORED_SURV_MODIFY will return EEXIST error.
The conveniene macro FAN_MARK_IGNORE_SURV is added for
(FAN_MARK_IGNORE | FAN_MARK_IGNORED_SURV_MODIFY), because the
common case should use short constant names.
Link: https://lore.kernel.org/r/20220629144210.2983229-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We waste a u64 SQE field for flags even though we don't need as many
bits and it can be used for something more useful later. Store io_uring
specific send/recv flags in sqe->ioprio instead of ->addr2.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 0455d4ccec ("io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg")
[axboe: change comment in io_uring.h as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Including <linux/mptcp.h> before the C library <netinet/in.h> header
causes symbol redefinition errors at compile-time due to duplicate
declarations and definitions in the <linux/in.h> header included by
<linux/mptcp.h>.
Explicitly include <netinet/in.h> before <linux/in.h> in
<linux/mptcp.h> when __KERNEL__ is not defined so that the C library
compatibility logic in <linux/libc-compat.h> is enabled when including
<linux/mptcp.h> in user space code.
Fixes: c11c5906bc ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support")
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sometimes we want to know an accurate number of samples even if it's
lost. Currenlty PERF_RECORD_LOST is generated for a ring-buffer which
might be shared with other events. So it's hard to know per-event
lost count.
Add event->lost_samples field and PERF_FORMAT_LOST to retrieve it from
userspace.
Original-patch-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220616180623.1358843-1-namhyung@kernel.org
To embrace possible future optimizations of TLS, rename zerocopy
sendfile definitions to more generic ones:
* setsockopt: TLS_TX_ZEROCOPY_SENDFILE- > TLS_TX_ZEROCOPY_RO
* sock_diag: TLS_INFO_ZC_SENDFILE -> TLS_INFO_ZC_RO_TX
RO stands for readonly and emphasizes that the application shouldn't
modify the data being transmitted with zerocopy to avoid potential
disconnection.
Fixes: c1318b39c7 ("tls: Add opt-in zerocopy mode of sendfile()")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/r/20220608153425.3151146-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull delay-accounting update from Andrew Morton:
"A single featurette for delay accounting.
Delayed a bit because, unusually, it had dependencies on both the
mm-stable and mm-nonmm-stable queues"
* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
delayacct: track delays from write-protect copy
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
Pull initial Loongarch architecture code from Arnd Bergmann:
"This is the majority of the loongarch architecture code, including the
final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so it
is currently impossible to boot the kernel, until the loongarch
specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the PCI
subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI for
the libc ports to build on, and to help any treewide changes in the
mainline kernel get applied here as well.
A gcc-12 based tool chains for build testing is now included in
https://mirrors.edge.kernel.org/pub/tools/crosstool/"
Original description from Huacai Chen:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
https://github.com/loongson/linux/tree/loongarch-next
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next
Cross-compile tool chain to build kernel:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz
A CLFS-based Linux distro:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2
Open-source tool chain which is under review (Binutils and Gcc are already upstream):
https://github.com/loongson/binutils-gdb/tree/upstream_v3.1
https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3
https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2
Loongson and LoongArch documentations:
https://github.com/loongson/LoongArch-Documentation
LoongArch-specific interrupt controllers:
https://mantis.uefi.org/mantis/view.php?id=2203
https://mantis.uefi.org/mantis/view.php?id=2313"
Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/
* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
MAINTAINERS: Add maintainer information for LoongArch
LoongArch: Add Loongson-3 default config file
LoongArch: Add Non-Uniform Memory Access (NUMA) support
LoongArch: Add multi-processor (SMP) support
LoongArch: Add VDSO and VSYSCALL support
LoongArch: Add some library functions
LoongArch: Add misc common routines
LoongArch: Add ELF and module support
LoongArch: Add signal handling support
LoongArch: Add system call support
LoongArch: Add memory management
LoongArch: Add process management
LoongArch: Add exception/interrupt handling
LoongArch: Add boot and setup routines
LoongArch: Add other common headers
LoongArch: Add atomic/locking headers
LoongArch: Add CPU definition headers
LoongArch: Add build infrastructure
LoongArch: Add writecombine support for drm
LoongArch: Add ELF-related definitions
...
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
