Pull Kbuild updates from Masahiro Yamada:
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...
Pull RISC-V updates from Palmer Dabbelt:
- Improvements to the CPU topology subsystem, which fix some issues
where RISC-V would report bad topology information.
- The default NR_CPUS has increased to XLEN, and the maximum
configurable value is 512.
- The CD-ROM filesystems have been enabled in the defconfig.
- Support for THP_SWAP has been added for rv64 systems.
There are also a handful of cleanups and fixes throughout the tree.
* tag 'riscv-for-linus-6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: enable THP_SWAP for RV64
RISC-V: Print SSTC in canonical order
riscv: compat: s/failed/unsupported if compat mode isn't supported
RISC-V: Increase range and default value of NR_CPUS
cpuidle: riscv-sbi: Fix CPU_PM_CPU_IDLE_ENTER_xyz() macro usage
perf: RISC-V: throttle perf events
perf: RISC-V: exclude invalid pmu counters from SBI calls
riscv: enable CD-ROM file systems in defconfig
riscv: topology: fix default topology reporting
arm64: topology: move store_cpu_topology() to shared code
Pull kvm updates from Paolo Bonzini:
"The first batch of KVM patches, mostly covering x86.
ARM:
- Account stage2 page table allocations in memory stats
x86:
- Account EPT/NPT arm64 page table allocations in memory stats
- Tracepoint cleanups/fixes for nested VM-Enter and emulated MSR
accesses
- Drop eVMCS controls filtering for KVM on Hyper-V, all known
versions of Hyper-V now support eVMCS fields associated with
features that are enumerated to the guest
- Use KVM's sanitized VMCS config as the basis for the values of
nested VMX capabilities MSRs
- A myriad event/exception fixes and cleanups. Most notably, pending
exceptions morph into VM-Exits earlier, as soon as the exception is
queued, instead of waiting until the next vmentry. This fixed a
longstanding issue where the exceptions would incorrecly become
double-faults instead of triggering a vmexit; the common case of
page-fault vmexits had a special workaround, but now it's fixed for
good
- A handful of fixes for memory leaks in error paths
- Cleanups for VMREAD trampoline and VMX's VM-Exit assembly flow
- Never write to memory from non-sleepable kvm_vcpu_check_block()
- Selftests refinements and cleanups
- Misc typo cleanups
Generic:
- remove KVM_REQ_UNHALT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits)
KVM: remove KVM_REQ_UNHALT
KVM: mips, x86: do not rely on KVM_REQ_UNHALT
KVM: x86: never write to memory from kvm_vcpu_check_block()
KVM: x86: Don't snapshot pending INIT/SIPI prior to checking nested events
KVM: nVMX: Make event request on VMXOFF iff INIT/SIPI is pending
KVM: nVMX: Make an event request if INIT or SIPI is pending on VM-Enter
KVM: SVM: Make an event request if INIT or SIPI is pending when GIF is set
KVM: x86: lapic does not have to process INIT if it is blocked
KVM: x86: Rename kvm_apic_has_events() to make it INIT/SIPI specific
KVM: x86: Rename and expose helper to detect if INIT/SIPI are allowed
KVM: nVMX: Make an event request when pending an MTF nested VM-Exit
KVM: x86: make vendor code check for all nested events
mailmap: Update Oliver's email address
KVM: x86: Allow force_emulation_prefix to be written without a reload
KVM: selftests: Add an x86-only test to verify nested exception queueing
KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes
KVM: x86: Rename inject_pending_events() to kvm_check_and_inject_events()
KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle behavior
KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions
KVM: x86: Morph pending exceptions to pending VM-Exits at queue time
...
Pull EFI updates from Ard Biesheuvel:
"A bit more going on than usual in the EFI subsystem. The main driver
for this has been the introduction of the LoonArch architecture last
cycle, which inspired some cleanup and refactoring of the EFI code.
Another driver for EFI changes this cycle and in the future is
confidential compute.
The LoongArch architecture does not use either struct bootparams or DT
natively [yet], and so passing information between the EFI stub and
the core kernel using either of those is undesirable. And in general,
overloading DT has been a source of issues on arm64, so using DT for
this on new architectures is a to avoid for the time being (even if we
might converge on something DT based for non-x86 architectures in the
future). For this reason, in addition to the patch that enables EFI
boot for LoongArch, there are a number of refactoring patches applied
on top of which separate the DT bits from the generic EFI stub bits.
These changes are on a separate topich branch that has been shared
with the LoongArch maintainers, who will include it in their pull
request as well. This is not ideal, but the best way to manage the
conflicts without stalling LoongArch for another cycle.
Another development inspired by LoongArch is the newly added support
for EFI based decompressors. Instead of adding yet another
arch-specific incarnation of this pattern for LoongArch, we are
introducing an EFI app based on the existing EFI libstub
infrastructure that encapulates the decompression code we use on other
architectures, but in a way that is fully generic. This has been
developed and tested in collaboration with distro and systemd folks,
who are eager to start using this for systemd-boot and also for arm64
secure boot on Fedora. Note that the EFI zimage files this introduces
can also be decompressed by non-EFI bootloaders if needed, as the
image header describes the location of the payload inside the image,
and the type of compression that was used. (Note that Fedora's arm64
GRUB is buggy [0] so you'll need a recent version or switch to
systemd-boot in order to use this.)
Finally, we are adding TPM measurement of the kernel command line
provided by EFI. There is an oversight in the TCG spec which results
in a blind spot for command line arguments passed to loaded images,
which means that either the loader or the stub needs to take the
measurement. Given the combinatorial explosion I am anticipating when
it comes to firmware/bootloader stacks and firmware based attestation
protocols (SEV-SNP, TDX, DICE, DRTM), it is good to set a baseline now
when it comes to EFI measured boot, which is that the kernel measures
the initrd and command line. Intermediate loaders can measure
additional assets if needed, but with the baseline in place, we can
deploy measured boot in a meaningful way even if you boot into Linux
straight from the EFI firmware.
Summary:
- implement EFI boot support for LoongArch
- implement generic EFI compressed boot support for arm64, RISC-V and
LoongArch, none of which implement a decompressor today
- measure the kernel command line into the TPM if measured boot is in
effect
- refactor the EFI stub code in order to isolate DT dependencies for
architectures other than x86
- avoid calling SetVirtualAddressMap() on arm64 if the configured
size of the VA space guarantees that doing so is unnecessary
- move some ARM specific code out of the generic EFI source files
- unmap kernel code from the x86 mixed mode 1:1 page tables"
* tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
efi/arm64: libstub: avoid SetVirtualAddressMap() when possible
efi: zboot: create MemoryMapped() device path for the parent if needed
efi: libstub: fix up the last remaining open coded boot service call
efi/arm: libstub: move ARM specific code out of generic routines
efi/libstub: measure EFI LoadOptions
efi/libstub: refactor the initrd measuring functions
efi/loongarch: libstub: remove dependency on flattened DT
efi: libstub: install boot-time memory map as config table
efi: libstub: remove DT dependency from generic stub
efi: libstub: unify initrd loading between architectures
efi: libstub: remove pointless goto kludge
efi: libstub: simplify efi_get_memory_map() and struct efi_boot_memmap
efi: libstub: avoid efi_get_memory_map() for allocating the virt map
efi: libstub: drop pointless get_memory_map() call
efi: libstub: fix type confusion for load_options_size
arm64: efi: enable generic EFI compressed boot
loongarch: efi: enable generic EFI compressed boot
riscv: efi: enable generic EFI compressed boot
efi/libstub: implement generic EFI zboot
efi/libstub: move efi_system_table global var into separate object
...
I have a Sipeed Lichee RV dock board which only has 512MB DDR, so
memory optimizations such as swap on zram are helpful. As is seen
in commit d0637c505f ("arm64: enable THP_SWAP for arm64") and
commit bd4c82c22c ("mm, THP, swap: delay splitting THP after
swapped out"), THP_SWAP can improve the swap throughput significantly.
Enable THP_SWAP for RV64, testing the micro-benchmark which is
introduced by commit d0637c505f ("arm64: enable THP_SWAP for arm64")
shows below numbers on the Lichee RV dock board:
swp out bandwidth w/o patch: 66908 bytes/ms (mean of 10 tests)
swp out bandwidth w/ patch: 322638 bytes/ms (mean of 10 tests)
Improved by 382%!
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220829145742.3139-1-jszhang@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When compat mode isn't supported(I believe this is the most case now),
kernel will emit somthing as:
[ 0.050407] riscv: ELF compat mode failed
This msg may make users think there's something wrong with the kernel
itself, replace "failed" with "unsupported" to make it clear. In fact
this is the real compat_mode_supported meaning. After the patch, the
msg would be:
[ 0.050407] riscv: ELF compat mode unsupported
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220821141819.3804-1-jszhang@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, the range and default value of NR_CPUS is too restrictive
for high-end RISC-V systems with large number of HARTs. The latest
QEMU virt machine supports upto 512 CPUs so the current NR_CPUS is
restrictive for QEMU as well. Other major architectures (such as
ARM64, x86_64, MIPS, etc) have a much higher range and default
value of NR_CPUS.
This patch increases NR_CPUS range to 2-512 and default value to
XLEN (i.e. 32 for RV32 and 64 for RV64).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Link: https://lore.kernel.org/r/20220420112408.155561-1-apatel@ventanamicro.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Kbuild puts the objects listed in head-y at the head of vmlinux.
Conventionally, we do this for head*.S, which contains the kernel entry
point.
A counter approach is to control the section order by the linker script.
Actually, the code marked as __HEAD goes into the ".head.text" section,
which is placed before the normal ".text" section.
I do not know if both of them are needed. From the build system
perspective, head-y is not mandatory. If you can achieve the proper code
placement by the linker script only, it would be cleaner.
I collected the current head-y objects into head-object-list.txt. It is
a whitelist. My hope is it will be reduced in the long run.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The objects placed at the head of vmlinux need special treatments:
- arch/$(SRCARCH)/Makefile adds them to head-y in order to place
them before other archives in the linker command line.
- arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of
obj-y to avoid them going into built-in.a.
This commit gets rid of the latter.
Create vmlinux.a to collect all the objects that are unconditionally
linked to vmlinux. The objects listed in head-y are moved to the head
of vmlinux.a by using 'ar m'.
With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y
for builtin objects.
There is no *.o that is directly linked to vmlinux. Drop unneeded code
in scripts/clang-tools/gen_compile_commands.py.
$(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested
by Nathan Chancellor [1].
[1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of build fixes for the T-Head errata, including some
functional issues the compilers found
- A fix for a nasty sigreturn bug
* tag 'riscv-for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Avoid coupling the T-Head CMOs and Zicbom
riscv: fix a nasty sigreturn bug...
riscv: make t-head erratas depend on MMU
riscv: fix RISCV_ISA_SVPBMT kconfig dependency warning
RISC-V: Clean up the Zicbom block size probing
The stub is used in different execution environments, but on arm64,
RISC-V and LoongArch, we still use the core kernel's implementation of
memcpy and memset, as they are just a branch instruction away, and can
generally be reused even from code such as the EFI stub that runs in a
completely different address space.
KAsan complicates this slightly, resulting in the need for some hacks to
expose the uninstrumented, __ prefixed versions as the normal ones, as
the latter are instrumented to include the KAsan checks, which only work
in the core kernel.
Unfortunately, #define'ing memcpy to __memcpy when building C code does
not guarantee that no explicit memcpy() calls will be emitted. And with
the upcoming zboot support, which consists of a separate binary which
therefore needs its own implementation of memcpy/memset anyway, it's
better to provide one explicitly instead of linking to the existing one.
Given that EFI exposes implementations of memmove() and memset() via the
boot services table, let's wire those up in the appropriate way, and
drop the references to the core kernel ones.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
riscv has an equivalent of arm bug fixed by 653d48b221 ("arm: fix
really nasty sigreturn bug"); if signal gets caught by an interrupt that
hits when we have the right value in a0 (-513), *and* another signal
gets delivered upon sigreturn() (e.g. included into the blocked mask for
the first signal and posted while the handler had been running), the
syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are
in a syscall, after all) and a0 already restored to its original value
(-513, which happens to be -ERESTARTNOINTR) and assume that we need to
apply the usual syscall restart logics.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YxJEiSq%2FCGaL6Gm9@ZenIV/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This fixes two issues: I truncated the warning's hart ID when porting to
the 64-bit hart ID code, and the original code's warning handling could
fire on an uninitialized hart ID.
The biggest change here is that riscv_cbom_block_size is no longer
initialized, as IMO the default isn't sane: there's nothing in the ISA
that mandates any specific cache block size, so falling back to one will
just silently produce the wrong answer on some systems. This also
changes the probing order so the cache block size is known before
enabling Zicbom support.
CC: stable@vger.kernel.org
CC: Andrew Jones <ajones@ventanamicro.com>
CC: Heiko Stuebner <heiko@sntech.de>
CC: Atish Patra <atishp@rivosinc.com>
Fixes: 3aefb2ee5b ("riscv: implement Zicbom-based CMO instructions + the t-head variant")
Fixes: 1631ba1259 ("riscv: Add support for non-coherent devices using zicbom extension")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
[Conor: fixed the redefinition errors]
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220912224800.998121-1-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of device tree fixes for the Polarfire SOC
- A fix to avoid overflowing the PMU counter array when firmware
incorrectly reports the number of supported counters, which manifests
on OpenSBI versions prior to 1.1
* tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
perf: RISC-V: fix access beyond allocated array
riscv: dts: microchip: use an mpfs specific l2 compatible
dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
Pull kvm fixes from Paolo Bonzini:
"s390:
- PCI interpretation compile fixes
RISC-V:
- fix unused variable warnings in vcpu_timer.c
- move extern sbi_ext declarations to a header
x86:
- check validity of argument to KVM_SET_MP_STATE
- use guest's global_ctrl to completely disable guest PEBS
- fix a memory leak on memory allocation failure
- mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES
- fix build failure with Clang integrated assembler
- fix MSR interception
- always flush TLBs when enabling dirty logging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: check validity of argument to KVM_SET_MP_STATE
perf/x86/core: Completely disable guest PEBS via guest's global_ctrl
KVM: x86: fix memoryleak in kvm_arch_vcpu_create()
KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES
KVM: s390: pci: Hook to access KVM lowlevel from VFIO
riscv: kvm: move extern sbi_ext declarations to a header
riscv: kvm: vcpu_timer: fix unused variable warnings
KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE()
KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang
KVM: VMX: Heed the 'msr' argument in msr_write_intercepted()
kvm: x86: mmu: Always flush TLBs when enabling dirty logging
kvm: x86: mmu: Drop the need_remote_flush() function
The mmap lock protects the page walker from changes to the page tables
during the walk. However a read lock is insufficient to protect those
areas which don't have a VMA as munmap() detaches the VMAs before
downgrading to a read lock and actually tearing down PTEs/page tables.
For users of walk_page_range() the solution is to simply call pte_hole()
immediately without checking the actual page tables when a VMA is not
present. We now never call __walk_page_range() without a valid vma.
For walk_page_range_novma() the locking requirements are tightened to
require the mmap write lock to be taken, and then walking the pgd
directly with 'no_vma' set.
This in turn means that all page walkers either have a valid vma, or
it's that special 'novma' case for page table debugging. As a result,
all the odd '(!walk->vma && !walk->no_vma)' tests can be removed.
Fixes: dd2283f260 ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PolarFire SoC does not have the same l2 cache controller as the fu540,
featuring an extra interrupt. Appease the devicetree checker overlords
by adding a PolarFire SoC specific compatible to fix the below sort of
warnings:
mpfs-polarberry.dtb: cache-controller@2010000: interrupts: [[1], [3], [4], [2]] is too long
Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
Fixes: 34fc9cc3ae ("riscv: dts: microchip: correct L2 cache interrupts")
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This contains a pair of fixes for build-time warnings.
* 'riscv-variable_fixes_without_kvm' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux.git:
riscv: traps: add missing prototype
riscv: signal: fix missing prototype warning
Microchip RISC-V devicetree fixes for 6.0-rc3
Two sets of fixes this time around:
- A fix for the interrupt ordering of the l2-cache controller. If the
driver is enabled, it would spam the console /constantly/, rendering
the system useless.
- General cleanup for some bogus properties in the dt, part of my quest
for zero dtbs_check warnings.
On that note, the interrupt ordering adds a dtbs_check warning - but I
considered that fixing the potentially useless system was more of a
priority.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'dt-fixes-for-palmer-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git:
riscv: dts: microchip: mpfs: remove pci axi address translation property
riscv: dts: microchip: mpfs: remove bogus card-detect-delay
riscv: dts: microchip: mpfs: remove ti,fifo-depth property
riscv: dts: microchip: mpfs: fix incorrect pcie child node name
riscv: dts: microchip: correct L2 cache interrupts
Recent versions of dt-schema warn about a previously undetected
undocumented property:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: mmc@20008000: Unevaluated properties are not allowed ('card-detect-delay' was unexpected)
From schema: Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
There are no GPIOs connected to MSSIO6B4 pin K3 so adding the common
cd-debounce-delay-ms property makes no sense. The Cadence IP has a
register that sets the card detect delay as "DP * tclk". On MPFS, this
clock frequency is not configurable (it must be 200 MHz) & the FPGA
comes out of reset with this register already set.
Fixes: bc47b2217f ("riscv: dts: microchip: add the sundance polarberry")
Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Recent versions of dt-schema warn about a previously undetected
undocument property on the icicle & polarberry devicetrees:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: ethernet@20112000: ethernet-phy@8: Unevaluated properties are not allowed ('ti,fifo-depth' was unexpected)
From schema: Documentation/devicetree/bindings/net/cdns,macb.yaml
I know what you're thinking, the binding doesn't look to be the problem
and I agree. I am not sure why a TI vendor property was ever actually
added since it has no meaning... just get rid of it.
Fixes: bc47b2217f ("riscv: dts: microchip: add the sundance polarberry")
Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Recent versions of dt-schema complain about the PCIe controller's child
node name:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected)
From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
Make the dts match the correct property name in the dts.
Fixes: 528a5b1f25 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to make the ISA extension static keys writable after init. This
manifests at least as a crash when loading modules (including KVM).
- A fixup for a build warning related to a poorly formed comment in our
perf driver.
* tag 'riscv-for-linus-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
perf: riscv legacy: fix kerneldoc comment warning
riscv: Ensure isa-ext static keys are writable
Sparse complains about missing statics in the declarations of several
variables:
arch/riscv/kvm/vcpu_sbi_replace.c:38:37: warning: symbol 'vcpu_sbi_ext_time' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:73:37: warning: symbol 'vcpu_sbi_ext_ipi' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:126:37: warning: symbol 'vcpu_sbi_ext_rfence' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:170:37: warning: symbol 'vcpu_sbi_ext_srst' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:69:37: warning: symbol 'vcpu_sbi_ext_base' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:90:37: warning: symbol 'vcpu_sbi_ext_experimental' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:96:37: warning: symbol 'vcpu_sbi_ext_vendor' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_hsm.c:115:37: warning: symbol 'vcpu_sbi_ext_hsm' was not declared. Should it be static?
These variables are however used in vcpu_sbi.c where they are declared
as extern. Move them to kvm_vcpu_sbi.h which is handily already
included by the three other files.
Fixes: a046c2d857 ("RISC-V: KVM: Reorganize SBI code by moving SBI v0.1 to its own file")
Fixes: 5f862df558 ("RISC-V: KVM: Add v0.1 replacement SBI extensions defined in v0.2")
Fixes: 3e1d86569c ("RISC-V: KVM: Add SBI HSM extension in KVM")
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
In two places, csr is set but never used:
arch/riscv/kvm/vcpu_timer.c:302:23: warning: variable 'csr' set but not used [-Wunused-but-set-variable]
struct kvm_vcpu_csr *csr;
^
arch/riscv/kvm/vcpu_timer.c:327:23: warning: variable 'csr' set but not used [-Wunused-but-set-variable]
struct kvm_vcpu_csr *csr;
^
Remove the variable.
Fixes: 8f5cb44b1b ("RISC-V: KVM: Support sstc extension")
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the warning:
arch/riscv/kernel/signal.c:316:27: warning: no previous prototype for function 'do_notify_resume' [-Wmissing-prototypes]
asmlinkage __visible void do_notify_resume(struct pt_regs *regs,
All other functions in the file are static & none of the existing
headers stood out as an obvious location. Create signal.h to hold the
declaration.
Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220814141237.493457-4-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The "PolarFire SoC MSS Technical Reference Manual" documents the
following PLIC interrupts:
1 - L2 Cache Controller Signals when a metadata correction event occurs
2 - L2 Cache Controller Signals when an uncorrectable metadata event occurs
3 - L2 Cache Controller Signals when a data correction event occurs
4 - L2 Cache Controller Signals when an uncorrectable data event occurs
This differs from the SiFive FU540 which only has three L2 cache related
interrupts.
The sequence in the device tree is defined by an enum:
enum {
DIR_CORR = 0,
DATA_CORR,
DATA_UNCORR,
DIR_UNCORR,
};
So the correct sequence of the L2 cache interrupts is
interrupts = <1>, <3>, <4>, <2>;
[Conor]
This manifests as an unusable system if the l2-cache driver is enabled,
as the wrong interrupt gets cleared & the handler prints errors to the
console ad infinitum.
Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
CC: stable@vger.kernel.org # 5.15: e35b07a7df: riscv: dts: microchip: mpfs: Group tuples in interrupt properties
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
riscv_isa_ext_keys[] is an array of static keys used in the unified
ISA extension framework. The keys added to this array may be used
anywhere, including in modules. Ensure the keys remain writable by
placing them in the data section.
The need to change riscv_isa_ext_keys[]'s section was found when the
kvm module started failing to load. Commit 8eb060e101 ("arch/riscv:
add Zihintpause support") adds a static branch check for a newly
added isa-ext key to cpu_relax(), which kvm uses.
Fixes: c360cbec35 ("riscv: introduce unified static key mechanism for ISA extensions")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Cc: stable@vger.kernel.org
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Anup Patel <apatel@ventanamicro.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220816163058.3004536-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V has no sane defaults to fall back on where there is no cpu-map
in the devicetree.
Without sane defaults, the package, core and thread IDs are all set to
-1. This causes user-visible inaccuracies for tools like hwloc/lstopo
which rely on the sysfs cpu topology files to detect a system's
topology.
On a PolarFire SoC, which should have 4 harts with a thread each,
lstopo currently reports:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
Core L#0
L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)
Adding calls to store_cpu_topology() in {boot,smp} hart bringup code
results in the correct topolgy being reported:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
CC: stable@vger.kernel.org # 456797da79: arm64: topology: move store_cpu_topology() to shared code
Fixes: 03f11f03db ("RISC-V: Parse cpu topology during boot.")
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Pull more RISC-V updates from Palmer Dabbelt:
"There's still a handful of new features in here, but there are a lot
of fixes/cleanups as well:
- Support for the Zicbom extension for explicit cache-block
management, along with the necessary bits to make the non-standard
cache management ops on the Allwinner D1 function
- Support for the Zihintpause extension, which codifies a go-slow
instruction used for cpu_relax()
- Support for the Sstc extension for supervisor-mode timer/counter
management
- Many device tree fixes and cleanups, including a large set for the
Canaan device trees
- A handful of fixes and cleanups for the PMU driver"
* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
dt-bindings: gpio: sifive: add gpio-line-names
wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
RISC-V: KVM: Support sstc extension
RISC-V: Improve SBI definitions
RISC-V: Move counter info definition to sbi header file
RISC-V: Fix SBI PMU calls for RV32
RISC-V: Update user page mapping only once during start
RISC-V: Fix counter restart during overflow for RV32
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
riscv:uprobe fix SR_SPIE set/clear handling
dt-bindings: riscv: fix SiFive l2-cache's cache-sets
riscv: ensure cpu_ops_sbi is declared
RISC-V: cpu_ops_spinwait.c should include head.h
RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
riscv: dts: starfive: correct number of external interrupts
riscv: dts: sifive unmatched: Add PWM controlled LEDs
riscv/purgatory: Omit use of bin2c
riscv/purgatory: hard-code obj-y in Makefile
...
Sstc extension allows the guest to program the vstimecmp CSR directly
instead of making an SBI call to the hypervisor to program the next
event. The timer interrupt is also directly injected to the guest by
the hardware in this case. To maintain backward compatibility, the
hypervisors also update the vstimecmp in an SBI set_time call if
the hardware supports it. Thus, the older kernels in guest also
take advantage of the sstc extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/CAAhSdy2mb6wyqy0NAn9BcTWKMYEc0Z4zU3s3j7oNqBz6eDQ9sg@mail.gmail.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This series implements Sstc extension support which was ratified
recently. Before the Sstc extension, an SBI call is necessary to
generate timer interrupts as only M-mode have access to the timecompare
registers. Thus, there is significant latency to generate timer
interrupts at kernel. For virtualized enviornments, its even worse as
the KVM handles the SBI call and uses a software timer to emulate the
timecomapre register.
Sstc extension solves both these problems by defining a
stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to
program a timer and recieve interrupt without supervisor execution
enviornment (M-mode/HS mode) intervention.
* palmer/riscv-sstc:
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
