This is the 6.6.89 stable release
* tag 'v6.6.89': (12214 commits)
Linux 6.6.89
objtool: Silence more KCOV warnings, part 2
objtool: Ignore end-of-section jumps for KCOV/GCOV
nvme: fixup scan failure for non-ANA multipath controllers
MIPS: cm: Fix warning if MIPS_CM is disabled
net: dsa: mv88e6xxx: enable STU methods for 6320 family
net: dsa: mv88e6xxx: enable .port_set_policy() for 6320 family
net: dsa: mv88e6xxx: enable PVT for 6321 switch
net: dsa: mv88e6xxx: fix atu_move_port_mask for 6341 family
ext4: goto right label 'out_mmap_sem' in ext4_setattr()
comedi: jr3_pci: Fix synchronous deletion of timer
vmxnet3: Fix malformed packet sizing in vmxnet3_process_xdp
driver core: fix potential NULL pointer dereference in dev_uevent()
driver core: introduce device_set_driver() helper
Revert "drivers: core: synchronize really_probe() and dev_uevent()"
x86/pvh: Call C code via the kernel virtual mapping
spi: spi-imx: Add check for spi_imx_setupxfer()
md/raid1: Add check for missing source disk in process_checks()
x86/cpu: Add CPU model number for Bartlett Lake CPUs with Raptor Cove cores
ubsan: Fix panic from test_ubsan_out_of_bounds
...
Change-Id: I31ab72227263d390aed9b4c8c3361d6abd19fa57
* commit '62646c7ab19511b8fc17078cf4b0603e550e73cd': (119202 commits)
clk: rockchip: Fix missing rkclk_cpuclk_div_setting prototype for rk3128
rtc: rk808: Explicitly include of.h for of_get_child_by_name
ASoC: rk817: Explicitly include gpio/consumer.h for devm_gpiod_get_optional
drm/rockchip: dsi2: add crtc post enable and pre disable callback
drm/rockchip: vop2: set dsc config done in crtc post enable
input: sensors: avoid -Wempty-body warning
input: sensors: accel: dmard10: Make gsensor_reset() static
ASoC: rk312x: Fix missing prototypes
arm64: dts: rockchip: rk3518: Add rockchip,video-1080p-freq for cpu opp table
soc: rockchip: system_monitor: Add support to limit cpu max freq when play 1080p video
net: phy: Convert to use sysfs_emit_at() API
drm/rockchip: dw_hdmi: Explicitly include pinctrl/consumer.h for devm_pinctrl_get
net: rfkill: bt: Explicitly include pinctrl/consumer.h for pinctrl_select_state
ASoC: codecs: rk_dsm: Explicitly include pinctrl/consumer.h for devm_pinctrl_get
spi: rockchip-slave: Explicitly include pinctrl/consumer.h for pinctrl_pm_select_sleep_state
media: rockchip: isp: Explicitly include platform_device.h
regulator: rk801: Explicitly include platform_device.h
soc: rockchip: decompress: Explicitly include of_platform.h for of_platform_device_create
soc: rockchip: thunderboot_mmc: Explicitly include of_platform.h for of_platform_device_create
soc: rockchip: thunderboot_sfc: Explicitly include of_platform.h for of_platform_device_create
...
Change-Id: I88628746fa5e58f85cf991634fe2f6355ac937e8
This is the 6.1.115 stable release
* tag 'v6.1.115': (2780 commits)
Linux 6.1.115
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
ACPI: PRM: Clean up guid type in struct prm_handler_info
platform/x86: dell-wmi: Ignore suspend notifications
ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()
net: phy: dp83822: Fix reset pin definitions
serial: protect uart_port_dtr_rts() in uart_shutdown() too
selinux: improve error checking in sel_write_load()
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
xfrm: fix one more kernel-infoleak in algo dumping
LoongArch: Get correct cores_per_package for SMT systems
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
openat2: explicitly return -E2BIG for (usize > PAGE_SIZE)
nilfs2: fix kernel bug due to missing clearing of buffer delay flag
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
...
Change-Id: Iee600c49a5c914b79141c62cda38e787e429a167
Conflicts:
arch/arm64/boot/dts/rockchip/rk356x.dtsi
drivers/gpio/gpio-rockchip.c
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.h
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
drivers/gpu/drm/rockchip/rockchip_vop_reg.c
drivers/media/i2c/imx335.c
drivers/pci/controller/dwc/pcie-dw-rockchip.c
drivers/spi/spi-rockchip.c
drivers/spi/spidev.c
drivers/usb/dwc3/gadget.c
drivers/usb/host/xhci.h
commit 76be4f5a784533c71afbbb1b8f2963ef9e2ee258 upstream.
Commit 3f1b0e1f28 (".gitignore update") added *.orig and *.rej
patterns to .gitignore in v2.6.23. The commit message didn't give a
rationale. Later on, commit 1f5d3a6b65 ("Remove *.rej pattern from
.gitignore") removed the *.rej pattern in v2.6.26, on the rationale that
*.rej files indicated something went really wrong and should not be
ignored.
The *.rej files are now shown by `git status`, which helps located
conflicts when applying patches and lowers the probability that they
will go unnoticed. It is however still easy to overlook the *.orig files
which slowly polute the source tree. That's not as big of a deal as not
noticing a conflict, but it's still not nice.
Drop the *.orig pattern from .gitignore to avoid this and help keep the
source tree clean.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[masahiroy@kernel.org:
I do not have a strong opinion about this. Perhaps some people may have
a different opinion.
If you are someone who wants to ignore *.orig, it is likely you would
want to do so across all projects. Then, $XDG_CONFIG_HOME/git/ignore
would be more suitable for your needs. gitignore(5) suggests, "Patterns
which a user wants Git to ignore in all situations generally go into a
file specified by core.excludesFile in the user's ~/.gitconfig".
Please note that you cannot do the opposite; if *.orig is ignored by
the project's .gitignore, you cannot override the decision because
$XDG_CONFIG_HOME/git/ignore has a lower priority.
If *.orig is sitting on the fence, I'd leave it to the users. ]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76be4f5a784533c71afbbb1b8f2963ef9e2ee258 upstream.
Commit 3f1b0e1f28 (".gitignore update") added *.orig and *.rej
patterns to .gitignore in v2.6.23. The commit message didn't give a
rationale. Later on, commit 1f5d3a6b65 ("Remove *.rej pattern from
.gitignore") removed the *.rej pattern in v2.6.26, on the rationale that
*.rej files indicated something went really wrong and should not be
ignored.
The *.rej files are now shown by `git status`, which helps located
conflicts when applying patches and lowers the probability that they
will go unnoticed. It is however still easy to overlook the *.orig files
which slowly polute the source tree. That's not as big of a deal as not
noticing a conflict, but it's still not nice.
Drop the *.orig pattern from .gitignore to avoid this and help keep the
source tree clean.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[masahiroy@kernel.org:
I do not have a strong opinion about this. Perhaps some people may have
a different opinion.
If you are someone who wants to ignore *.orig, it is likely you would
want to do so across all projects. Then, $XDG_CONFIG_HOME/git/ignore
would be more suitable for your needs. gitignore(5) suggests, "Patterns
which a user wants Git to ignore in all situations generally go into a
file specified by core.excludesFile in the user's ~/.gitconfig".
Please note that you cannot do the opposite; if *.orig is ignored by
the project's .gitignore, you cannot override the decision because
$XDG_CONFIG_HOME/git/ignore has a lower priority.
If *.orig is sitting on the fence, I'd leave it to the users. ]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now kernel.spec and binkernel.spec have the exactly same contents.
Use kernel.spec for binrpm-pkg as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit 534066a983.
It's actively detrimental in that it hides files that shouldn't be
hidden.
If I have some b4 mbx file in my git directory, it either was already
applied with "git am" and is now stale, or maybe it's waiting for that
to happen. In neither case is "ignore it" the right option.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_TRIM_UNUSED_KSYMS is enabled, Kbuild recursively traverses
the directory tree to determine which EXPORT_SYMBOL to trim. If an
EXPORT_SYMBOL turns out to be unused by anyone, Kbuild begins the
second traverse, where some source files are recompiled with their
EXPORT_SYMBOL() tuned into a no-op.
Linus stated negative opinions about this slowness in commits:
- 5cf0fd591f ("Kbuild: disable TRIM_UNUSED_KSYMS option")
- a555bdd0c5 ("Kbuild: enable TRIM_UNUSED_KSYMS again, with some guarding")
We can do this better now. The final data structures of EXPORT_SYMBOL
are generated by the modpost stage, so modpost can selectively emit
KSYMTAB entries that are really used by modules.
Commit f73edc8951 ("kbuild: unify two modpost invocations") is another
ground-work to do this in a one-pass algorithm. With the list of modules,
modpost sets sym->used if it is used by a module. modpost emits KSYMTAB
only for symbols with sym->used==true.
BTW, Nicolas explained why the trimming was implemented with recursion:
https://lore.kernel.org/all/2o2rpn97-79nq-p7s2-nq5-8p83391473r@syhkavp.arg/
Actually, we never achieved that level of optimization where the chain
reaction of trimming comes into play because:
- CONFIG_LTO_CLANG cannot remove any unused symbols
- CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is enabled only for vmlinux,
but not modules
If deeper trimming is required, we need to revisit this, but I guess
that is unlikely to happen.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull KUnit updates from Shuah Khan:
- several fixes to kunit tool
- new klist structure test
- support for m68k under QEMU
- support for overriding the QEMU serial port
- support for SH under QEMU
* tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: add tests for using current KUnit test field
kunit: tool: Add support for SH under QEMU
kunit: tool: Add support for overriding the QEMU serial port
.gitignore: Unignore .kunitconfig
list: test: Test the klist structure
kunit: increase KUNIT_LOG_SIZE to 2048 bytes
kunit: Use gfp in kunit_alloc_resource() kernel-doc
kunit: tool: fix pre-existing `mypy --strict` errors and update run_checks.py
kunit: tool: remove unused imports and variables
kunit: tool: add subscripts for type annotations where appropriate
kunit: fix bug of extra newline characters in debugfs logs
kunit: fix bug in the order of lines in debugfs logs
kunit: fix bug in debugfs logs of parameterized tests
kunit: tool: Add support for m68k under QEMU
Prepare to add more files to the source RPM.
Also, fix the build error when KCONFIG_CONFIG is set:
error: Bad file: ./.config: No such file or directory
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'b4' command creates a *.mbx file, and also a *.cover file if the
patch set has a cover-letter. Ignore them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Recent git versions do not accept the noted command.
$ git ls-files -i --exclude-standard
fatal: ls-files -i must be used with either -o or -c
The -c was implied before, but we need to make it explicit since
git commit b338e9f66873 ("ls-files: error out on -i unless -o or -c
are specified").
Also, replace --exclude-standard with --exclude-per-directory=.gitignore
so that everyone will get consistent results.
git-ls-files(1) says:
--exclude-standard
Add the standard Git exclusions: .git/info/exclude, .gitignore in
each directory, and the user's global exclusion file.
We cannot predict what is locally added to .git/info/exclude or the
user's global exclusion file.
We can only manage .gitignore files committed to the repository.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f95 ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is the configuration file for the `rustfmt` tool.
`rustfmt` is a tool for formatting Rust code according to style guidelines.
It is very commonly used across Rust projects.
The default configuration options are used.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The *.mod files have two lines; the first line lists the member objects
of the module, and the second line, if CONFIG_TRIM_UNUSED_KSYMS=y, lists
the undefined symbols.
Currently, we generate *.mod after constructing composite modules,
otherwise, we cannot compute the second line. No prerequisite is
required to print the first line.
They are orthogonal. Splitting them into separate commands will ease
further cleanups.
This commit splits the list of undefined symbols out to *.usyms files.
Previously, the list of undefined symbols ended up with a very long
line, but now it has one symbol per line.
Use sed like we did before commit 7d32358be8 ("kbuild: avoid split
lines in .mod files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
* android12-5.10: (2274 commits)
FROMGIT: mm: slub: move sysfs slab alloc/free interfaces to debugfs
ANDROID: gki - CONFIG_NET_SCH_FQ=y
ANDROID: GKI: Kconfig.gki: Add GKI_HIDDEN_ETHERNET_CONFIGS
FROMLIST: media: Kconfig: Fix DVB_CORE can't be selected as module
ANDROID: Update ABI and symbol list
Revert "net: usb: cdc_ncm: don't spew notifications"
ANDROID: Fips 140: move fips symbols entirely in own list
ANDROID: core of xt_IDLETIMER send_nl_msg support
ANDROID: start to re-add xt_IDLETIMER send_nl_msg support
ANDROID: add fips140.ko symbols to module ABI
ANDROID: inject correct HMAC digest into fips140.ko at build time
ANDROID: crypto: fips140 - perform load time integrity check
FROMLIST: crypto: shash - stop comparing function pointers to avoid breaking CFI
ANDROID: arm64: module: preserve RELA sections for FIPS140 integrity selfcheck
ANDROID: arm64: simd: omit capability check in may_use_simd()
ANDROID: kbuild: lto: permit the use of .a archives in LTO modules
ANDROID: arm64: only permit certain alternatives in the FIPS140 module
ANDROID: crypto: lib/aes - add vendor hooks for AES library routines
ANDROID: crypto: lib/sha256 - add vendor hook for sha256() routine
UPSTREAM: KVM: arm64: Mark the host stage-2 memory pools static
...
Conflicts:
drivers/mmc/core/mmc_ops.c
drivers/usb/gadget/function/f_uac1.c
drivers/usb/gadget/function/f_uac2.c
drivers/usb/gadget/function/f_uvc.c
Changes in 5.10.38
KEYS: trusted: Fix memory leak on object td
tpm: fix error return code in tpm2_get_cc_attrs_tbl()
tpm, tpm_tis: Extend locality handling to TPM2 in tpm_tis_gen_interrupt()
tpm, tpm_tis: Reserve locality in tpm_tis_resume()
KVM: x86/mmu: Remove the defunct update_pte() paging hook
KVM/VMX: Invoke NMI non-IST entry instead of IST entry
ACPI: PM: Add ACPI ID of Alder Lake Fan
PM: runtime: Fix unpaired parent child_count for force_resume
cpufreq: intel_pstate: Use HWP if enabled by platform firmware
kvm: Cap halt polling at kvm->max_halt_poll_ns
ath11k: fix thermal temperature read
fs: dlm: fix debugfs dump
fs: dlm: add errno handling to check callback
fs: dlm: check on minimum msglen size
fs: dlm: flush swork on shutdown
tipc: convert dest node's address to network order
ASoC: Intel: bytcr_rt5640: Enable jack-detect support on Asus T100TAF
net/mlx5e: Use net_prefetchw instead of prefetchw in MPWQE TX datapath
net: stmmac: Set FIFO sizes for ipq806x
ASoC: rsnd: core: Check convert rate in rsnd_hw_params
Bluetooth: Fix incorrect status handling in LE PHY UPDATE event
i2c: bail out early when RDWR parameters are wrong
ALSA: hdsp: don't disable if not enabled
ALSA: hdspm: don't disable if not enabled
ALSA: rme9652: don't disable if not enabled
ALSA: bebob: enable to deliver MIDI messages for multiple ports
Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default
Bluetooth: initialize skb_queue_head at l2cap_chan_create()
net/sched: cls_flower: use ntohs for struct flow_dissector_key_ports
net: bridge: when suppression is enabled exclude RARP packets
Bluetooth: check for zapped sk before connecting
selftests/powerpc: Fix L1D flushing tests for Power10
powerpc/32: Statically initialise first emergency context
net: hns3: remediate a potential overflow risk of bd_num_list
net: hns3: add handling for xmit skb with recursive fraglist
ip6_vti: proper dev_{hold|put} in ndo_[un]init methods
ASoC: Intel: bytcr_rt5640: Add quirk for the Chuwi Hi8 tablet
ice: handle increasing Tx or Rx ring sizes
Bluetooth: btusb: Enable quirk boolean flag for Mediatek Chip.
ASoC: rt5670: Add a quirk for the Dell Venue 10 Pro 5055
i2c: Add I2C_AQ_NO_REP_START adapter quirk
MIPS: Loongson64: Use _CACHE_UNCACHED instead of _CACHE_UNCACHED_ACCELERATED
coresight: Do not scan for graph if none is present
IB/hfi1: Correct oversized ring allocation
mac80211: clear the beacon's CRC after channel switch
pinctrl: samsung: use 'int' for register masks in Exynos
rtw88: 8822c: add LC calibration for RTL8822C
mt76: mt7615: support loading EEPROM for MT7613BE
mt76: mt76x0: disable GTK offloading
mt76: mt7915: fix txpower init for TSSI off chips
fuse: invalidate attrs when page writeback completes
virtiofs: fix userns
cuse: prevent clone
iwlwifi: pcie: make cfg vs. trans_cfg more robust
powerpc/mm: Add cond_resched() while removing hpte mappings
ASoC: rsnd: call rsnd_ssi_master_clk_start() from rsnd_ssi_init()
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove performance counter pre-initialization test
drm/amd/display: Force vsync flip when reconfiguring MPCC
selftests: Set CC to clang in lib.mk if LLVM is set
kconfig: nconf: stop endless search loops
ALSA: hda/realtek: Add quirk for Lenovo Ideapad S740
ASoC: Intel: sof_sdw: add quirk for new ADL-P Rvp
ALSA: hda/hdmi: fix race in handling acomp ELD notification at resume
sctp: Fix out-of-bounds warning in sctp_process_asconf_param()
flow_dissector: Fix out-of-bounds warning in __skb_flow_bpf_to_target()
powerpc/smp: Set numa node before updating mask
ASoC: rt286: Generalize support for ALC3263 codec
ethtool: ioctl: Fix out-of-bounds warning in store_link_ksettings_for_user()
net: sched: tapr: prevent cycle_time == 0 in parse_taprio_schedule
samples/bpf: Fix broken tracex1 due to kprobe argument change
powerpc/pseries: Stop calling printk in rtas_stop_self()
drm/amd/display: fixed divide by zero kernel crash during dsc enablement
drm/amd/display: add handling for hdcp2 rx id list validation
drm/amdgpu: Add mem sync flag for IB allocated by SA
mt76: mt7615: fix entering driver-own state on mt7663
crypto: ccp: Free SEV device if SEV init fails
wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt
wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join
qtnfmac: Fix possible buffer overflow in qtnf_event_handle_external_auth
powerpc/iommu: Annotate nested lock for lockdep
iavf: remove duplicate free resources calls
net: ethernet: mtk_eth_soc: fix RX VLAN offload
selftests: mlxsw: Increase the tolerance of backlog buildup
selftests: mlxsw: Fix mausezahn invocation in ERSPAN scale test
kbuild: generate Module.symvers only when vmlinux exists
bnxt_en: Add PCI IDs for Hyper-V VF devices.
ia64: module: fix symbolizer crash on fdescr
watchdog: rename __touch_watchdog() to a better descriptive name
watchdog: explicitly update timestamp when reporting softlockup
watchdog/softlockup: remove logic that tried to prevent repeated reports
watchdog: fix barriers when printing backtraces from all CPUs
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
thermal: thermal_of: Fix error return code of thermal_of_populate_bind_params()
f2fs: move ioctl interface definitions to separated file
f2fs: fix compat F2FS_IOC_{MOVE,GARBAGE_COLLECT}_RANGE
f2fs: fix to allow migrating fully valid segment
f2fs: fix panic during f2fs_resize_fs()
f2fs: fix a redundant call to f2fs_balance_fs if an error occurs
remoteproc: qcom_q6v5_mss: Replace ioremap with memremap
remoteproc: qcom_q6v5_mss: Validate p_filesz in ELF loader
PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()
PCI: Release OF node in pci_scan_device()'s error path
ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook
f2fs: fix to align to section for fallocate() on pinned file
f2fs: fix to update last i_size if fallocate partially succeeds
PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit BAR
PCI: endpoint: Add helper API to get the 'next' unreserved BAR
PCI: endpoint: Make *_free_bar() to return error codes on failure
PCI: endpoint: Fix NULL pointer dereference for ->get_features()
f2fs: fix to avoid touching checkpointed data in get_victim()
f2fs: fix to cover __allocate_new_section() with curseg_lock
f2fs: Fix a hungtask problem in atomic write
f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block()
rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()
NFS: nfs4_bitmask_adjust() must not change the server global bitmasks
NFS: Fix attribute bitmask in _nfs42_proc_fallocate()
NFSv4.2: Always flush out writes in nfs42_proc_fallocate()
NFS: Deal correctly with attribute generation counter overflow
PCI: endpoint: Fix missing destroy_workqueue()
pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()
NFSv4.2 fix handling of sr_eof in SEEK's reply
SUNRPC: Move fault injection call sites
SUNRPC: Remove trace_xprt_transmit_queued
SUNRPC: Handle major timeout in xprt_adjust_timeout()
thermal/drivers/tsens: Fix missing put_device error
NFSv4.x: Don't return NFS4ERR_NOMATCHING_LAYOUT if we're unmounting
nfsd: ensure new clients break delegations
rtc: fsl-ftm-alarm: add MODULE_TABLE()
dmaengine: idxd: Fix potential null dereference on pointer status
dmaengine: idxd: fix dma device lifetime
dmaengine: idxd: fix cdev setup and free device lifetime issues
SUNRPC: fix ternary sign expansion bug in tracing
pwm: atmel: Fix duty cycle calculation in .get_state()
xprtrdma: Avoid Receive Queue wrapping
xprtrdma: Fix cwnd update ordering
xprtrdma: rpcrdma_mr_pop() already does list_del_init()
swiotlb: Fix the type of index
ceph: fix inode leak on getattr error in __fh_to_dentry
scsi: qla2xxx: Prevent PRLI in target mode
scsi: ufs: core: Do not put UFS power into LPM if link is broken
scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
scsi: ufs: core: Narrow down fast path in system suspend path
rtc: ds1307: Fix wday settings for rx8130
net: hns3: fix incorrect configuration for igu_egu_hw_err
net: hns3: initialize the message content in hclge_get_link_mode()
net: hns3: add check for HNS3_NIC_STATE_INITED in hns3_reset_notify_up_enet()
net: hns3: fix for vxlan gpe tx checksum bug
net: hns3: use netif_tx_disable to stop the transmit queue
net: hns3: disable phy loopback setting in hclge_mac_start_phy
sctp: do asoc update earlier in sctp_sf_do_dupcook_a
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
sunrpc: Fix misplaced barrier in call_decode
libbpf: Fix signed overflow in ringbuf_process_ring
block/rnbd-clt: Change queue_depth type in rnbd_clt_session to size_t
block/rnbd-clt: Check the return value of the function rtrs_clt_query
ethernet:enic: Fix a use after free bug in enic_hard_start_xmit
sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
netfilter: xt_SECMARK: add new revision to fix structure layout
xsk: Fix for xp_aligned_validate_desc() when len == chunk_size
net: stmmac: Clear receive all(RA) bit when promiscuous mode is off
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/radeon: Avoid power table parsing memory leaks
arm64: entry: factor irq triage logic into macros
arm64: entry: always set GIC_PRIO_PSR_I_SET during entry
khugepaged: fix wrong result value for trace_mm_collapse_huge_page_isolate()
mm/hugeltb: handle the error case in hugetlb_fix_reserve_counts()
mm/migrate.c: fix potential indeterminate pte entry in migrate_vma_insert_page()
ksm: fix potential missing rmap_item for stable_node
mm/gup: check every subpage of a compound page during isolation
mm/gup: return an error on migration failure
mm/gup: check for isolation errors
ethtool: fix missing NLM_F_MULTI flag when dumping
net: fix nla_strcmp to handle more then one trailing null character
smc: disallow TCP_ULP in smc_setsockopt()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
netfilter: nftables: Fix a memleak from userdata error path in new objects
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251x: fix resume from sleep before interface was brought up
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
sched: Fix out-of-bound access in uclamp
sched/fair: Fix unfairness caused by missing load decay
fs/proc/generic.c: fix incorrect pde_is_permanent check
kernel: kexec_file: fix error return code of kexec_calculate_store_digests()
kernel/resource: make walk_system_ram_res() find all busy IORESOURCE_SYSTEM_RAM resources
kernel/resource: make walk_mem_res() find all busy IORESOURCE_MEM resources
netfilter: nftables: avoid overflows in nft_hash_buckets()
i40e: fix broken XDP support
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
mptcp: fix splat when closing unaccepted socket
f2fs: avoid unneeded data copy in f2fs_ioc_move_range()
ARC: entry: fix off-by-one error in syscall number validation
ARC: mm: PAE: use 40-bit physical page mask
ARC: mm: Use max_high_pfn as a HIGHMEM zone border
powerpc/64s: Fix crashes when toggling stf barrier
powerpc/64s: Fix crashes when toggling entry flush barrier
hfsplus: prevent corruption in shrinking truncate
squashfs: fix divide error in calculate_skip()
userfaultfd: release page in error path to avoid BUG_ON
kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
blk-iocost: fix weight updates of inner active iocgs
arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
btrfs: fix race leading to unpersisted data and metadata on fsync
drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
drm/amd/display: Initialize attribute for hdcp_srm sysfs file
drm/i915: Avoid div-by-zero on gen2
kvm: exit halt polling on need_resched() as well
KVM: LAPIC: Accurately guarantee busy wait for timer to expire when using hv_timer
drm/msm/dp: initialize audio_comp when audio starts
KVM: x86: Cancel pvclock_gtod_work on module removal
KVM: x86: Prevent deadlock against tk_core.seq
dax: Add an enum for specifying dax wakup mode
dax: Add a wakeup mode parameter to put_unlocked_entry()
dax: Wake up all waiters after invalidating dax entry
xen/unpopulated-alloc: consolidate pgmap manipulation
xen/unpopulated-alloc: fix error return code in fill_list()
perf tools: Fix dynamic libbpf link
usb: dwc3: gadget: Free gadget structure only after freeing endpoints
iio: light: gp2ap002: Fix rumtime PM imbalance on error
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
usb: fotg210-hcd: Fix an error message
hwmon: (occ) Fix poll rate limiting
usb: musb: Fix an error message
ACPI: scan: Fix a memory leak in an error handling path
kyber: fix out of bounds access when preempted
nvmet: add lba to sect conversion helpers
nvmet: fix inline bio check for bdev-ns
nvmet-rdma: Fix NULL deref when SEND is completed with error
f2fs: compress: fix to free compress page correctly
f2fs: compress: fix race condition of overwrite vs truncate
f2fs: compress: fix to assign cc.cluster_idx correctly
nbd: Fix NULL pointer in flush_workqueue
blk-mq: plug request for shared sbitmap
blk-mq: Swap two calls in blk_mq_exit_queue()
usb: dwc3: omap: improve extcon initialization
usb: dwc3: pci: Enable usb2-gadget-lpm-disable for Intel Merrifield
usb: xhci: Increase timeout for HC halt
usb: dwc2: Fix gadget DMA unmap direction
usb: core: hub: fix race condition about TRSMRCY of resume
usb: dwc3: gadget: Enable suspend events
usb: dwc3: gadget: Return success always for kick transfer in ep queue
usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
usb: typec: ucsi: Put fwnode in any case during ->probe()
xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
xhci: Do not use GFP_KERNEL in (potentially) atomic context
xhci: Add reset resume quirk for AMD xhci controller.
iio: gyro: mpu3050: Fix reported temperature value
iio: tsl2583: Fix division by a zero lux_val
cdc-wdm: untangle a circular dependency between callback and softint
xen/gntdev: fix gntdev_mmap() error exit path
KVM: x86: Emulate RDPID only if RDTSCP is supported
KVM: x86: Move RDPID emulation intercept to its own enum
KVM: nVMX: Always make an attempt to map eVMCS after migration
KVM: VMX: Do not advertise RDPID if ENABLE_RDTSCP control is unsupported
KVM: VMX: Disable preemption when probing user return MSRs
Revert "iommu/vt-d: Remove WO permissions on second-level paging entries"
Revert "iommu/vt-d: Preset Access/Dirty bits for IOVA over FL"
iommu/vt-d: Preset Access/Dirty bits for IOVA over FL
iommu/vt-d: Remove WO permissions on second-level paging entries
mm: fix struct page layout on 32-bit systems
MIPS: Reinstate platform `__div64_32' handler
MIPS: Avoid DIVU in `__div64_32' is result would be zero
MIPS: Avoid handcoded DIVU in `__div64_32' altogether
clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
ARM: 9011/1: centralize phys-to-virt conversion of DT/ATAGS address
ARM: 9012/1: move device tree mapping out of linear region
ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
usb: typec: tcpm: Fix error while calculating PPS out values
kobject_uevent: remove warning in init_uevent_argv()
drm/i915/gt: Fix a double free in gen8_preallocate_top_level_pdp
drm/i915: Read C0DRB3/C1DRB3 as 16 bits again
drm/i915/overlay: Fix active retire callback alignment
drm/i915: Fix crash in auto_retire
clk: exynos7: Mark aclk_fsys1_200 as critical
media: rkvdec: Remove of_match_ptr()
i2c: mediatek: Fix send master code at more than 1MHz
dt-bindings: media: renesas,vin: Make resets optional on R-Car Gen1
dt-bindings: serial: 8250: Remove duplicated compatible strings
debugfs: Make debugfs_allow RO after init
ext4: fix debug format string warning
nvme: do not try to reconfigure APST when the controller is not live
ASoC: rsnd: check all BUSIF status when error
Linux 5.10.38
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ia32e01283b488a38be48015c58a0e481f09aaf65
[ Upstream commit 69bc8d386a ]
The external module build shows the following warning if Module.symvers
is missing in the kernel tree.
WARNING: Symbol version dump "Module.symvers" is missing.
Modules may not have dependencies or modversions.
I think this is an important heads-up because the resulting modules may
not work as expected. This happens when you did not build the entire
kernel tree, for example, you might have prepared the minimal setups
for external modules by 'make defconfig && make modules_preapre'.
A problem is that 'make modules' creates Module.symvers even without
vmlinux. In this case, that warning is suppressed since Module.symvers
already exists in spite of its incomplete content.
The incomplete (i.e. invalid) Module.symvers should not be created.
This commit changes the second pass of modpost to dump symbols into
modules-only.symvers. The final Module.symvers is created by
concatenating vmlinux.symvers and modules-only.symvers if both exist.
Module.symvers is supposed to collect symbols from both vmlinux and
modules. It might be a bit confusing, and I am not quite sure if it
is an official interface, but presumably it is difficult to rename it
because some tools (e.g. kmod) parse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
modules.builtin used to be created in every directory.
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), modules.builtin is created only
in the top directory.
Add the '/' prefix so that it matches to only the modules.builtin located
in the top directory.
It has been more than one year since that change. I hope this will not
flood 'Untracked files' of 'git status'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For consistency, move tags and TAGS close to the cscope and GNU Global
patterns.
I removed the '/' prefix in case somebody wants to manually create tag
files in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The external module build shows the following warning if Module.symvers
is missing in the kernel tree.
WARNING: Symbol version dump "Module.symvers" is missing.
Modules may not have dependencies or modversions.
I think this is an important heads-up because the resulting modules may
not work as expected. This happens when you did not build the entire
kernel tree, for example, you might have prepared the minimal setups
for external modules by 'make defconfig && make modules_preapre'.
A problem is that 'make modules' creates Module.symvers even without
vmlinux. In this case, that warning is suppressed since Module.symvers
already exists in spite of its incomplete content.
The incomplete (i.e. invalid) Module.symvers should not be created.
This commit changes the second pass of modpost to dump symbols into
modules-only.symvers. The final Module.symvers is created by
concatenating vmlinux.symvers and modules-only.symvers if both exist.
Module.symvers is supposed to collect symbols from both vmlinux and
modules. It might be a bit confusing, and I am not quite sure if it
is an official interface, but presumably it is difficult to rename it
because some tools (e.g. kmod) parse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It can be quite useful to have ld emit a link map file, in order to
debug or verify that special sections end up where they are supposed
to, and to see what LD_DEAD_CODE_DATA_ELIMINATION manages to get rid
of.
The only reason I'm not just adding this unconditionally is that the
.map file can be rather large (several MB), and that's a waste of
space when one isn't interested in these things. Also make it depend
on CONFIG_EXPERT.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit dc5723b02e
("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
build:
make LLVM=1 LLVM_IAS=1 defconfig
scripts/config -e LTO_CLANG_THIN
make LLVM=1 LLVM_IAS=1
(To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
and "ARCH=arm64" to the "make" command lines.)
Summary:
- Clang LTO build infrastructure and arm64-specific enablement (Sami
Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"
* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
arm64: allow LTO to be selected
arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
arm64: vdso: disable LTO
drivers/misc/lkdtm: disable LTO for rodata.o
efi/libstub: disable LTO
scripts/mod: disable LTO for empty.c
modpost: lto: strip .lto from module names
PCI: Fix PREL32 relocations for LTO
init: lto: fix PREL32 relocations
init: lto: ensure initcall ordering
kbuild: lto: add a default list of used symbols
kbuild: lto: merge module sections
kbuild: lto: limit inlining
kbuild: lto: fix module versioning
kbuild: add support for Clang LTO
tracing: move function tracer options to Kconfig
With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-4-samitolvanen@google.com
With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.
Bug: 145210207
Change-Id: Icd8fd0c760891eff7a0ed12ce48b4db2a85fc2ad
Link: https://lore.kernel.org/lkml/20201211184633.3213045-1-samitolvanen@google.com/
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The default way of building documentation is to use
Sphinx toolchain installed via pip, inside the
Kernel tree main directory. That's what's recommended by:
scripts/sphinx-pre-install
As it usually provides a better version of this package
than the one installed, specially on LTS distros.
So, add the directories created by running the commands
suggested by the script.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ac4e23d556c7d95cb11d6d5c605f43e425b2c3c7.1599660067.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Running `make savedefconfig` creates by default `defconfig`, which is,
currently, on git’s radar, for example, `git status` lists this file as
untracked.
So, add the file to `.gitignore`, so it’s ignored by git.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The full build runs modpost twice, first for vmlinux.o and second for
modules.
The first pass dumps all the vmlinux symbols into Module.symvers, but
the second pass parses vmlinux again instead of reusing the dump file,
presumably because it needs to avoid accumulating stale symbols.
Loading symbol info from a dump file is faster than parsing an ELF object.
Besides, modpost deals with various issues to parse vmlinux in the second
pass.
A solution is to make the first pass dumps symbols into a separate file,
vmlinux.symvers. The second pass reads it, and parses module .o files.
The merged symbol information is dumped into Module.symvers in the same
way as before.
This makes further modpost cleanups possible.
Also, it fixes the problem of 'make vmlinux', which previously overwrote
Module.symvers, throwing away module symbols.
I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked
when you cross this commit. Otherwise, vmlinux.symvers would not be
generated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The modpost, with the -d option given, generates per-module .ns_deps
files.
Kbuild generates per-module .mod files to carry module information.
This is convenient because Make handles multiple jobs in parallel
when the -j option is given.
On the other hand, the modpost always runs as a single thread.
I do not see a strong reason to produce separate .ns_deps files.
This commit changes the modpost to generate just one file,
modules.nsdeps, each line of which has the following format:
<module_name>: <list of missing namespaces>
Please note it contains *missing* namespaces instead of required ones.
So, modules.nsdeps is empty if the namespace dependency is all good.
This will work more efficiently because spatch will no longer process
already imported namespaces. I removed the '(if needed)' from the
nsdeps log since spatch is invoked only when needed.
This also solves the stale .ns_deps problem reported by Jessica Yu:
https://lkml.org/lkml/2019/10/28/467
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
Pull modules updates from Jessica Yu:
"The main bulk of this pull request introduces a new exported symbol
namespaces feature. The number of exported symbols is increasingly
growing with each release (we're at about 31k exports as of 5.3-rc7)
and we currently have no way of visualizing how these symbols are
"clustered" or making sense of this huge export surface.
Namespacing exported symbols allows kernel developers to more
explicitly partition and categorize exported symbols, as well as more
easily limiting the availability of namespaced symbols to other parts
of the kernel. For starters, we have introduced the USB_STORAGE
namespace to demonstrate the API's usage. I have briefly summarized
the feature and its main motivations in the tag below.
Summary:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing
kernel developers to better manage the export surface, allow
subsystem maintainers to explicitly state that usage of some
exported symbols should only be limited to certain users (think:
inter-module or inter-driver symbols, debugging symbols, etc), as
well as more easily limiting the availability of namespaced symbols
to other parts of the kernel.
With the module import requirement, it is also easier to spot the
misuse of exported symbols during patch review.
Two new macros are introduced: EXPORT_SYMBOL_NS() and
EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in
Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there"
* tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Remove leftover '#undef' from export header
module: remove unneeded casts in cmp_name()
module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES
module: remove redundant 'depends on MODULES'
module: Fix link failure due to invalid relocation on namespace offset
usb-storage: export symbols in USB_STORAGE namespace
usb-storage: remove single-use define for debugging
docs: Add documentation for Symbol Namespaces
scripts: Coccinelle script for namespace dependencies.
modpost: add support for generating namespace dependencies
export: allow definition default namespaces in Makefiles or sources
module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
modpost: add support for symbol namespaces
module: add support for symbol namespaces.
export: explicitly align struct kernel_symbol
module: support reading multiple values per modinfo tag
This patch adds an option to modpost to generate a <module>.ns_deps file
per module, containing the namespace dependencies for that module.
E.g. if the linked module my-module.ko would depend on the symbol
myfunc.MY_NS in the namespace MY_NS, the my-module.ns_deps file created
by modpost would contain the entry MY_NS to express the namespace
dependency of my-module imposed by using the symbol myfunc.
These files can subsequently be used by static analysis tools (like
coccinelle scripts) to address issues with missing namespace imports. A
later patch of this series will introduce such a script 'nsdeps' and a
corresponding make target to automatically add missing
MODULE_IMPORT_NS() definitions to the module's sources. For that it uses
the information provided in the generated .ns_deps files.
Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The pattern '*.order' was added by commit c6025f4c8b ("kbuild: ignore
*.order files") to ignore modules.order files.
I do not see any other user of the '.order' extension.
Ignore 'modules.order' explicitly instead of '*.order'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This file is used by clangd to use language server protocol.
It can be generated at each compile using scripts/gen_compile_commands.py.
Therefore it is different depending on the environment and should be
ignored.
Signed-off-by: Toru Komatsu <k0ma@utam0k.jp>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.
To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.
Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.
$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.
Stephen Rothwell reported a race condition caused by a module name
conflict:
https://lkml.org/lkml/2019/5/13/991
In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.
Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.
However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.
To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.
$(MODVERDIR) is no longer needed.
Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.
I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Also, sort the patterns alphabetically. Update the comment since
we have non-git files here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
For completeness, ignore all the allconfig variants.
I added a leading slash because they are only searched in the
top of the tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Problem:
When a kernel module is compiled as a separate module, some important
information about the kernel module is available via .modinfo section of
the module. In contrast, when the kernel module is compiled into the
kernel, that information is not available.
Information about built-in modules is necessary in the following cases:
1. When it is necessary to find out what additional parameters can be
passed to the kernel at boot time.
2. When you need to know which module names and their aliases are in
the kernel. This is very useful for creating an initrd image.
Proposal:
The proposed patch does not remove .modinfo section with module
information from the vmlinux at the build time and saves it into a
separate file after kernel linking. So, the kernel does not increase in
size and no additional information remains in it. Information is stored
in the same format as in the separate modules (null-terminated string
array). Because the .modinfo section is already exported with a separate
modules, we are not creating a new API.
It can be easily read in the userspace:
$ tr '\0' '\n' < modules.builtin.modinfo
ext4.softdep=pre: crc32c
ext4.license=GPL
ext4.description=Fourth Extended Filesystem
ext4.author=Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others
ext4.alias=fs-ext4
ext4.alias=ext3
ext4.alias=fs-ext3
ext4.alias=ext2
ext4.alias=fs-ext2
md_mod.alias=block-major-9-*
md_mod.alias=md
md_mod.description=MD RAID framework
md_mod.license=GPL
md_mod.parmtype=create_on_open:bool
md_mod.parmtype=start_dirty_degraded:int
...
Co-Developed-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
