hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses

Add support for reading and writing flow sensor pulses value on
the Aquacomputer Quadro. Implemented by Leonard Anderweit [1].

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/45

Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20221126071313.34356-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Documentation/hwmon/aquacomputer_d5next.rst

@@ -39,7 +39,7 @@ current.
 
 The Quadro exposes four physical and sixteen virtual temperature sensors, a flow
 sensor and four PWM controllable fans, along with their speed (in RPM), power,
-voltage and current.
+voltage and current. Flow sensor pulses are also available.
 
 The Farbwerk and Farbwerk 360 expose four temperature sensors. Additionally,
 sixteen virtual temperature sensors of the Farbwerk 360 are exposed.
@@ -64,6 +64,7 @@ Sysfs entries
 temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
 temp[1-4]_offset Temperature sensor correction offset (in millidegrees Celsius)
 fan[1-8]_input   Pump/fan speed (in RPM) / Flow speed (in dL/h)
+fan5_pulses      Quadro flow sensor pulses
 power[1-8]_input Pump/fan power (in micro Watts)
 in[0-7]_input    Pump/fan voltage (in milli Volts)
 curr[1-8]_input  Pump/fan current (in milli Amperes)

drivers/hwmon/aquacomputer_d5next.c

@@ -136,6 +136,7 @@ static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
 
 /* Control report offsets for the Quadro */
 #define QUADRO_TEMP_CTRL_OFFSET		0xA
+#define QUADRO_FLOW_PULSES_CTRL_OFFSET	0x6
 static u16 quadro_ctrl_fan_offsets[] = { 0x37, 0x8c, 0xe1, 0x136 }; /* Fan speed offsets (0-100%) */
 
 /* Specs of High Flow Next flow sensor */
@@ -303,6 +304,7 @@ struct aqc_data {
 	u16 temp_ctrl_offset;
 	u16 power_cycle_count_offset;
 	u8 flow_sensor_offset;
+	u8 flow_pulses_ctrl_offset;
 
 	/* General info, same across all devices */
 	u32 serial_number[2];
@@ -461,9 +463,14 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
 		}
 		break;
 	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+		case hwmon_fan_label:
 			switch (priv->kind) {
 			case highflownext:
-			/* Special case to support flow sensor, water quality and conductivity */
+				/* Special case to support flow sensor, water quality
+				 * and conductivity
+				 */
 				if (channel < 3)
 					return 0444;
 				break;
@@ -478,6 +485,15 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
 				break;
 			}
 			break;
+		case hwmon_fan_pulses:
+			/* Special case for Quadro flow sensor */
+			if (priv->kind == quadro && channel == priv->num_fans)
+				return 0644;
+			break;
+		default:
+			break;
+		}
+		break;
 	case hwmon_power:
 		switch (priv->kind) {
 		case highflownext:
@@ -552,8 +568,19 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		}
 		break;
 	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
 			*val = priv->speed_input[channel];
 			break;
+		case hwmon_fan_pulses:
+			ret = aqc_get_ctrl_val(priv, priv->flow_pulses_ctrl_offset, val);
+			if (ret < 0)
+				return ret;
+			break;
+		default:
+			break;
+		}
+		break;
 	case hwmon_power:
 		*val = priv->power_input[channel];
 		break;
@@ -632,6 +659,18 @@ static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 			return -EOPNOTSUPP;
 		}
 		break;
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_pulses:
+			val = clamp_val(val, 10, 1000);
+			ret = aqc_set_ctrl_val(priv, priv->flow_pulses_ctrl_offset, val);
+			if (ret < 0)
+				return ret;
+			break;
+		default:
+			break;
+		}
+		break;
 	case hwmon_pwm:
 		switch (attr) {
 		case hwmon_pwm_input:
@@ -691,7 +730,7 @@ static const struct hwmon_channel_info *aqc_info[] = {
 			   HWMON_F_INPUT | HWMON_F_LABEL,
 			   HWMON_F_INPUT | HWMON_F_LABEL,
 			   HWMON_F_INPUT | HWMON_F_LABEL,
-			   HWMON_F_INPUT | HWMON_F_LABEL,
+			   HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_PULSES,
 			   HWMON_F_INPUT | HWMON_F_LABEL,
 			   HWMON_F_INPUT | HWMON_F_LABEL,
 			   HWMON_F_INPUT | HWMON_F_LABEL),
@@ -1000,6 +1039,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
 
 		priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET;
+		priv->flow_pulses_ctrl_offset = QUADRO_FLOW_PULSES_CTRL_OFFSET;
 		priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
 
 		priv->temp_label = label_temp_sensors;