arm64: dts: rockchip: Add rv1126b-evb1-v10 dtsi
Signed-off-by: Su Yuefu <yuefu.su@rock-chips.com> Change-Id: I8016c749633ba6509f973709e33e6aca7319e4da
This commit is contained in:
Su Yuefu
Tao Huang
@@ -7,492 +7,9 @@
|
||||
#include "rv1126b.dtsi"
|
||||
#include "rv1126b-evb.dtsi"
|
||||
#include "rv1126b-evb-cam-csi0.dtsi"
|
||||
#include "rv1126b-evb1-v10.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RV1126B EVB1 V10 Board";
|
||||
compatible = "rockchip,rv1126b-evb1-v10", "rockchip,rv1126b";
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
vbus5v0_typec: vbus5v0-typec {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbus5v0_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio5 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&typec5v_pwren>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio5 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
};
|
||||
|
||||
vcc_mipi: vcc-mipi {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_mipi";
|
||||
gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_sd: vcc-sd {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-low;
|
||||
regulator-boot-on; // The legacy U-Boot GPIO driver needs this to set correct SDMMC0_PWREN value
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vccio_sd: vccio-sd {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-boot-on;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_volt>;
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
states = <1800000 0x0
|
||||
3300000 0x1>;
|
||||
};
|
||||
|
||||
vdd_npu: vdd-npu {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm0_8ch_0 0 25000 1>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-init-microvolt = <950000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
enable-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pwm-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart2m0_rtsn_pins>;
|
||||
pinctrl-1 = <&uart2_gpios>;
|
||||
BT,power_gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host>;
|
||||
wifi_chip_type = "rk96x";
|
||||
WIFI,host_wake_irq = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&acdcdig_dsm {
|
||||
status = "okay";
|
||||
pa-ctl-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&acodec_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&audio_codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&backlight {
|
||||
pwms = <&pwm2_8ch_4 0 25000 0>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_in_vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_panel {
|
||||
power-supply = <&vcc_mipi>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
non-removable;
|
||||
mmc-hs200-1_8v;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fspi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <75000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy-mode = "rmii";
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&rmii_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk801: rk801@27 {
|
||||
compatible = "rockchip,rk801";
|
||||
status = "okay";
|
||||
reg = <0x27>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pwrctrl-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc12v_dcin>;
|
||||
vcc2-supply = <&vcc12v_dcin>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_cpu: DCDC_REG1 {
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: DCDC_REG2 {
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_logic: DCDC_REG4 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd0v9_sys: LDO_REG1 {
|
||||
regulator-name = "vdd0v9_sys";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG2 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4m3_pins>;
|
||||
|
||||
gt1x: gt1x@14 {
|
||||
compatible = "goodix,gt1x";
|
||||
reg = <0x14>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touch_gpio>;
|
||||
power-supply = <&vcc_mipi>;
|
||||
goodix,rst-gpio = <&gpio7 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
goodix,irq-gpio = <&gpio7 RK_PA6 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
rmii_phy: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-id0680.8101", "ethernet-phy-ieee802.3-c22";
|
||||
reg = <2>;
|
||||
clocks = <&cru CLK_MACPHY>;
|
||||
clock-frequency = <50000000>;
|
||||
resets = <&cru SRST_RESETN_MACPHY>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fephym1_pins>;
|
||||
phy-is-integrated;
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
/omit-if-no-ref/
|
||||
sdmmc_volt: sdmmc-volt {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
touch {
|
||||
touch_gpio: touch-gpio {
|
||||
rockchip,pins =
|
||||
<7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
typec5v_pwren: typec5v-pwren {
|
||||
rockchip,pins = <5 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <5 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart2_gpios: uart2-gpios {
|
||||
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_wake_host: wifi-wake-host {
|
||||
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0_8ch_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2_8ch_4 {
|
||||
pinctrl-0 = <&pwm2m1_ch4_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp_vir0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkavsp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkavsp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkfec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkfec_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknpu {
|
||||
rknpu-supply = <&vdd_npu>;
|
||||
};
|
||||
|
||||
&route_dsi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai2 {
|
||||
status = "okay";
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ pinctrl-0;
|
||||
};
|
||||
|
||||
&saradc0 {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
no-sd;
|
||||
no-mmc;
|
||||
max-frequency = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_clk_pins &sdmmc1_cmd_pins &sdmmc1_bus4_pins>;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
//sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m0_xfer_pins &uart2m0_ctsn_pins>;
|
||||
};
|
||||
|
||||
&usb2phy_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
};
|
||||
|
||||
&usb2phy_otg {
|
||||
vbus-supply = <&vbus5v0_typec>;
|
||||
};
|
||||
|
||||
&usb_drd_dwc3 {
|
||||
dr_mode = "otg";
|
||||
extcon = <&usb2phy>;
|
||||
};
|
||||
|
||||
491
arch/arm64/boot/dts/rockchip/rv1126b-evb1-v10.dtsi
Normal file
491
arch/arm64/boot/dts/rockchip/rv1126b-evb1-v10.dtsi
Normal file
@@ -0,0 +1,491 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/ {
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
vbus5v0_typec: vbus5v0-typec {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbus5v0_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio5 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&typec5v_pwren>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio5 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
};
|
||||
|
||||
vcc_mipi: vcc-mipi {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_mipi";
|
||||
gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_sd: vcc-sd {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-low;
|
||||
regulator-boot-on; // The legacy U-Boot GPIO driver needs this to set correct SDMMC0_PWREN value
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vccio_sd: vccio-sd {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-boot-on;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_volt>;
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
states = <1800000 0x0
|
||||
3300000 0x1>;
|
||||
};
|
||||
|
||||
vdd_npu: vdd-npu {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm0_8ch_0 0 25000 1>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-init-microvolt = <950000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
enable-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pwm-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart2m0_rtsn_pins>;
|
||||
pinctrl-1 = <&uart2_gpios>;
|
||||
BT,power_gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host>;
|
||||
wifi_chip_type = "rk96x";
|
||||
WIFI,host_wake_irq = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&acdcdig_dsm {
|
||||
status = "okay";
|
||||
pa-ctl-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&acodec_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&audio_codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&backlight {
|
||||
pwms = <&pwm2_8ch_4 0 25000 0>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_in_vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_panel {
|
||||
power-supply = <&vcc_mipi>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
non-removable;
|
||||
mmc-hs200-1_8v;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fspi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <75000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy-mode = "rmii";
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&rmii_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk801: rk801@27 {
|
||||
compatible = "rockchip,rk801";
|
||||
status = "okay";
|
||||
reg = <0x27>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pwrctrl-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc12v_dcin>;
|
||||
vcc2-supply = <&vcc12v_dcin>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_cpu: DCDC_REG1 {
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: DCDC_REG2 {
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_logic: DCDC_REG4 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-mode = <0x2>;
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd0v9_sys: LDO_REG1 {
|
||||
regulator-name = "vdd0v9_sys";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG2 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4m3_pins>;
|
||||
|
||||
gt1x: gt1x@14 {
|
||||
compatible = "goodix,gt1x";
|
||||
reg = <0x14>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touch_gpio>;
|
||||
power-supply = <&vcc_mipi>;
|
||||
goodix,rst-gpio = <&gpio7 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
goodix,irq-gpio = <&gpio7 RK_PA6 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
rmii_phy: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-id0680.8101", "ethernet-phy-ieee802.3-c22";
|
||||
reg = <2>;
|
||||
clocks = <&cru CLK_MACPHY>;
|
||||
clock-frequency = <50000000>;
|
||||
resets = <&cru SRST_RESETN_MACPHY>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fephym1_pins>;
|
||||
phy-is-integrated;
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
/omit-if-no-ref/
|
||||
sdmmc_volt: sdmmc-volt {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
touch {
|
||||
touch_gpio: touch-gpio {
|
||||
rockchip,pins =
|
||||
<7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
typec5v_pwren: typec5v-pwren {
|
||||
rockchip,pins = <5 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <5 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart2_gpios: uart2-gpios {
|
||||
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_wake_host: wifi-wake-host {
|
||||
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0_8ch_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2_8ch_4 {
|
||||
pinctrl-0 = <&pwm2m1_ch4_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp_vir0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkavsp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkavsp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkfec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkfec_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknpu {
|
||||
rknpu-supply = <&vdd_npu>;
|
||||
};
|
||||
|
||||
&route_dsi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai2 {
|
||||
status = "okay";
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ pinctrl-0;
|
||||
};
|
||||
|
||||
&saradc0 {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
no-sd;
|
||||
no-mmc;
|
||||
max-frequency = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_clk_pins &sdmmc1_cmd_pins &sdmmc1_bus4_pins>;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
//sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m0_xfer_pins &uart2m0_ctsn_pins>;
|
||||
};
|
||||
|
||||
&usb2phy_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
};
|
||||
|
||||
&usb2phy_otg {
|
||||
vbus-supply = <&vbus5v0_typec>;
|
||||
};
|
||||
|
||||
&usb_drd_dwc3 {
|
||||
dr_mode = "otg";
|
||||
extcon = <&usb2phy>;
|
||||
};
|
||||
Reference in New Issue
Block a user