mirros/rockchip-kernel
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450

Browse Source 
SM8350 and SM8450 use 5nm DSI PHYs, which share register definitions
with 7nm DSI PHYs. Rather than duplicating the driver, handle 5nm
variants inside the common 5+7nm driver.

Co-developed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514230/
Link: https://lore.kernel.org/r/20221207012231.112059-7-dmitry.baryshkov@linaro.org
[DB: changed compatibles per Krzysztof's request]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This commit is contained in:
Dmitry Baryshkov
2022-12-07 03:22:26 +02:00
parent 1a1bd3f450
commit 2f9ae4e395
4 changed files with 118 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/gpu/drm/msm/Kconfig
View File

@@ -140,12 +140,12 @@ config DRM_MSM_DSI_10NM_PHY
Choose this option if DSI PHY on SDM845 is used on the platform.
config DRM_MSM_DSI_7NM_PHY
bool "Enable DSI 7nm PHY driver in MSM DRM"
bool "Enable DSI 7nm/5nm PHY driver in MSM DRM"
depends on DRM_MSM_DSI
default y
help
Choose this option if DSI PHY on SM8150/SM8250/SC7280 is used on
the platform.
Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SC7280
is used on the platform.
config DRM_MSM_HDMI
bool "Enable HDMI support in MSM DRM driver"

4
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
View File

@@ -569,6 +569,10 @@ static const struct of_device_id dsi_phy_dt_match[] = {
.data = &dsi_phy_7nm_8150_cfgs },
{ .compatible = "qcom,sc7280-dsi-phy-7nm",
.data = &dsi_phy_7nm_7280_cfgs },
{ .compatible = "qcom,sm8350-dsi-phy-5nm",
.data = &dsi_phy_5nm_8350_cfgs },
{ .compatible = "qcom,sm8450-dsi-phy-5nm",
.data = &dsi_phy_5nm_8450_cfgs },
#endif
{}
};

2
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
View File

@@ -57,6 +57,8 @@ extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
struct msm_dsi_dphy_timing {
u32 clk_zero;

119
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
View File

@@ -39,8 +39,14 @@
#define VCO_REF_CLK_RATE 19200000
#define FRAC_BITS 18
/* Hardware is pre V4.1 */
#define DSI_PHY_7NM_QUIRK_PRE_V4_1 BIT(0)
/* Hardware is V4.1 */
#define DSI_PHY_7NM_QUIRK_V4_1 BIT(0)
#define DSI_PHY_7NM_QUIRK_V4_1 BIT(1)
/* Hardware is V4.2 */
#define DSI_PHY_7NM_QUIRK_V4_2 BIT(2)
/* Hardware is V4.3 */
#define DSI_PHY_7NM_QUIRK_V4_3 BIT(3)
struct dsi_pll_config {
bool enable_ssc;
@@ -116,7 +122,7 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
dec_multiple = div_u64(pll_freq * multiplier, divider);
dec = div_u64_rem(dec_multiple, multiplier, &frac);
if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1))
if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1)
config->pll_clock_inverters = 0x28;
else if (pll_freq <= 1000000000ULL)
config->pll_clock_inverters = 0xa0;
@@ -197,16 +203,25 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
void __iomem *base = pll->phy->pll_base;
u8 analog_controls_five_1 = 0x01, vco_config_1 = 0x00;
if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1))
if (pll->vco_current_rate >= 3100000000ULL)
analog_controls_five_1 = 0x03;
if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
if (pll->vco_current_rate < 1520000000ULL)
vco_config_1 = 0x08;
else if (pll->vco_current_rate < 2990000000ULL)
vco_config_1 = 0x01;
}
if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_2) ||
(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3)) {
if (pll->vco_current_rate < 1520000000ULL)
vco_config_1 = 0x08;
else if (pll->vco_current_rate >= 2990000000ULL)
vco_config_1 = 0x01;
}
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1,
analog_controls_five_1);
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1);
@@ -231,9 +246,9 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PFILT, 0x2f);
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_IFILT, 0x2a);
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_IFILT,
pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1 ? 0x3f : 0x22);
!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1) ? 0x3f : 0x22);
if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1)) {
dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22);
if (pll->slave)
dsi_phy_write(pll->slave->phy->pll_base + REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE, 0x22);
@@ -788,7 +803,7 @@ static void dsi_phy_hw_v4_0_lane_settings(struct msm_dsi_phy *phy)
const u8 *tx_dctrl = tx_dctrl_0;
void __iomem *lane_base = phy->lane_base;
if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1)
if (!(phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1))
tx_dctrl = tx_dctrl_1;
/* Strength ctrl settings */
@@ -844,6 +859,12 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
if (dsi_phy_hw_v4_0_is_pll_on(phy))
pr_warn("PLL turned on before configuring PHY\n");
/* Request for REFGEN READY */
if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
dsi_phy_write(phy->base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x1);
udelay(500);
}
/* wait for REFGEN READY */
ret = readl_poll_timeout_atomic(base + REG_DSI_7nm_PHY_CMN_PHY_STATUS,
status, (status & BIT(0)),
@@ -858,28 +879,46 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
/* Alter PHY configurations if data rate less than 1.5GHZ*/
less_than_1500_mhz = (clk_req->bitclk_rate <= 1500000000);
glbl_str_swi_cal_sel_ctrl = 0x00;
if (phy->cphy_mode) {
vreg_ctrl_0 = 0x51;
vreg_ctrl_1 = 0x55;
glbl_hstx_str_ctrl_0 = 0x00;
glbl_pemph_ctrl_0 = 0x11;
lane_ctrl0 = 0x17;
} else {
vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
vreg_ctrl_1 = 0x5c;
glbl_hstx_str_ctrl_0 = 0x88;
glbl_pemph_ctrl_0 = 0x00;
lane_ctrl0 = 0x1f;
}
if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
if (phy->cphy_mode) {
glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x01;
glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3b;
} else {
glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x01;
glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x39;
}
} else if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_2) {
if (phy->cphy_mode) {
glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x01;
glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3b;
} else {
glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3c : 0x00;
glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x39;
}
} else if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
if (phy->cphy_mode) {
glbl_hstx_str_ctrl_0 = 0x88;
glbl_rescode_top_ctrl = 0x00;
glbl_rescode_bot_ctrl = 0x3c;
} else {
vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x00;
glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 : 0x3c;
}
glbl_str_swi_cal_sel_ctrl = 0x00;
glbl_hstx_str_ctrl_0 = 0x88;
} else {
if (phy->cphy_mode) {
glbl_str_swi_cal_sel_ctrl = 0x03;
@@ -1017,6 +1056,15 @@ static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy)
pr_warn("Turning OFF PHY while PLL is on\n");
dsi_phy_hw_v4_0_config_lpcdrx(phy, false);
/* Turn off REFGEN Vote */
if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x0);
wmb();
/* Delay to ensure HW removes vote before PHY shut down */
udelay(2);
}
data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_CTRL_0);
/* disable all lanes */
@@ -1040,6 +1088,10 @@ static const struct regulator_bulk_data dsi_phy_7nm_37750uA_regulators[] = {
{ .supply = "vdds", .init_load_uA = 37550 },
};
static const struct regulator_bulk_data dsi_phy_7nm_97800uA_regulators[] = {
{ .supply = "vdds", .init_load_uA = 97800 },
};
const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
.has_phy_lane = true,
.regulator_data = dsi_phy_7nm_36mA_regulators,
@@ -1079,6 +1131,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = {
.max_pll_rate = 3500000000UL,
.io_start = { 0xae94400, 0xae96400 },
.num_dsi_phy = 2,
.quirks = DSI_PHY_7NM_QUIRK_PRE_V4_1,
};
const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs = {
@@ -1102,3 +1155,49 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs = {
.num_dsi_phy = 1,
.quirks = DSI_PHY_7NM_QUIRK_V4_1,
};
const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs = {
.has_phy_lane = true,
.regulator_data = dsi_phy_7nm_37750uA_regulators,
.num_regulators = ARRAY_SIZE(dsi_phy_7nm_37750uA_regulators),
.ops = {
.enable = dsi_7nm_phy_enable,
.disable = dsi_7nm_phy_disable,
.pll_init = dsi_pll_7nm_init,
.save_pll_state = dsi_7nm_pll_save_state,
.restore_pll_state = dsi_7nm_pll_restore_state,
.set_continuous_clock = dsi_7nm_set_continuous_clock,
},
.min_pll_rate = 600000000UL,
#ifdef CONFIG_64BIT
.max_pll_rate = 5000000000UL,
#else
.max_pll_rate = ULONG_MAX,
#endif
.io_start = { 0xae94400, 0xae96400 },
.num_dsi_phy = 2,
.quirks = DSI_PHY_7NM_QUIRK_V4_2,
};
const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
.has_phy_lane = true,
.regulator_data = dsi_phy_7nm_97800uA_regulators,
.num_regulators = ARRAY_SIZE(dsi_phy_7nm_97800uA_regulators),
.ops = {
.enable = dsi_7nm_phy_enable,
.disable = dsi_7nm_phy_disable,
.pll_init = dsi_pll_7nm_init,
.save_pll_state = dsi_7nm_pll_save_state,
.restore_pll_state = dsi_7nm_pll_restore_state,
.set_continuous_clock = dsi_7nm_set_continuous_clock,
},
.min_pll_rate = 600000000UL,
#ifdef CONFIG_64BIT
.max_pll_rate = 5000000000UL,
#else
.max_pll_rate = ULONG_MAX,
#endif
.io_start = { 0xae94400, 0xae96400 },
.num_dsi_phy = 2,
.quirks = DSI_PHY_7NM_QUIRK_V4_3,
};